Benson Sleeved Blocks
The Benson Signature Series sleeved blocks are the best and strongest block available. NO ONE TOUCHES YOUR BLOCK BUT DAN BENSON. There are no excuses, no dropped sleeves, no decks cut on an angle, no egg shaped bores, no wrong sizes and no problems. Tolerances are held to .0001" (That is one TEN thousandths of an inch)
The $950 plus $50 shipping price INCLUDES the final bore/hone to the perfect size for your pistons. This price also includes your choice of O-rings or stepped deck. Turn around time in his shop is 7 days or less on sleeve installations. Good on all B, D, F, H and K blocks. For more information on Benson blocks, click on this link. https://honda-tech.com/zerothread?id=565375&page=1 |
Re: Benson Sleeved Blocks (earl)
|
Re: Benson Sleeved Blocks (EVOL)
Earl,
As stated in previous IMs to you I plan on pulling the my motor on Nov. 15th or 16th. Do you think I should wait till after the holidays to ship it out or ship it that next week? Remember I'm gonna have the motor sleeved and you assemble the bottom end with the parts I supply. |
Re: Benson Sleeved Blocks (Mikes01GSR)
Earl is going to be in vegas for SEMA this week, Id drop him an email and he'll get back to you when he gets a chance.
|
Re: Benson Sleeved Blocks (Mase)
Thanks Mase,
Don't know if you remember me or not but I own the twin of your previous car, have to drop me a line sometime. I'm sure earl when get back to me when he has the time. |
Re: Benson Sleeved Blocks (Mikes01GSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mikes01GSR »</TD></TR><TR><TD CLASS="quote">Thanks Mase,
Don't know if you remember me or not but I own the twin of your previous car, have to drop me a line sometime. I'm sure earl when get back to me when he has the time. </TD></TR></TABLE> https://honda-tech.com/forums/images/smilies/emthup.gif bump for earl and yes I remember talking to u, I will be up in PA tuning cars Nov 22nd. Hit me up on PM. |
Re: Benson Sleeved Blocks (earl)
.010=ten thousands
|
Re: Benson Sleeved Blocks (Mikes01GSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mikes01GSR »</TD></TR><TR><TD CLASS="quote">Earl,
As stated in previous IMs to you I plan on pulling the my motor on Nov. 15th or 16th. Do you think I should wait till after the holidays to ship it out or ship it that next week? Remember I'm gonna have the motor sleeved and you assemble the bottom end with the parts I supply. </TD></TR></TABLE>Before the holidays is fine. |
Re: Benson Sleeved Blocks (MSchu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MSchu »</TD></TR><TR><TD CLASS="quote">.010=ten thousands</TD></TR></TABLE>
No, one ten thousandth= .0001" one tenth of one one-thousandth= .0001" Way tight tolerances from a master machinist. |
Re: Benson Sleeved Blocks (earl)
|
Re: Benson Sleeved Blocks (MSchu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MSchu »</TD></TR><TR><TD CLASS="quote">.010=ten thousands</TD></TR></TABLE>
10,000, 10,000, and 10,000. |
Re: Benson Sleeved Blocks (nevin)
Well Sorry about that... I thought you said ten thousandths(.010) I re read your post and I got it all wrong... your the man
Schu |
Re: Benson Sleeved Blocks (MSchu)
|
Re: Benson Sleeved Blocks (earl)
What are the pros or cons of going with O-rings or with stepped deck?
|
Re: Benson Sleeved Blocks (eyeamvic)
my block is in the mail https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: Benson Sleeved Blocks (eyeamvic)
What are the pros or cons of going with O-rings or with stepped deck? i want know also because im seding my block to bensonin in one week https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: Benson Sleeved Blocks (TURBO BLUE HATCH)
I hate to say this but the trend is swinging back to flat decks rather than step. We have reduced the deck step down to .001" to .002"
|
Re: Benson Sleeved Blocks (earl)
Still interested in pros and cons of o-ring and stepped deck. Can you shed some light on the subject earl? https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: Benson Sleeved Blocks (eyeamvic)
i'm gonna guess better seal.
|
Re: Benson Sleeved Blocks (eyeamvic)
o-rings need to be replaced, most people don't have the skills to do that easily.
no maintenance with a step deck. both ways just help gasket seak a little. |
sorry if this question is dumb but that price includes the sleeves and the labor or just the labor?
Also does benson assemble the blocks if we sent them the parts? |
Re: (TypeRKoncepts)
bump for the fawkn man!!! https://honda-tech.com/forums/images/smilies/emthup.gif
|
Bump for an awesome guy!
|
Re: (TypeRKoncepts)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TypeRKoncepts »</TD></TR><TR><TD CLASS="quote">sorry if this question is dumb but that price includes the sleeves and the labor or just the labor?
Also does benson assemble the blocks if we sent them the parts?</TD></TR></TABLE>Price includes sleeves, installation and final bore and hone. We can do the assembly with your parts but only if they are good parts. |
Re: (earl)
how much more do you charge to install things that we would send in to you like pistons, rods, etc?
|
All times are GMT -8. The time now is 04:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands