HID retrofit projector/ballast and OBD2A distributor
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2003
Location: Washingtonian, USA
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
HID retrofit projector/ballast and OBD2A distributor
Sorry will have picture once I get to a computer to upload or text me for pictures
I have a few parts for a hid retrofit project
Pair of 2012 Lexus RX350 bi-xenon projectors ($150 OBO)
-these are one of the top 3 projectors used for retrofitting
-these have stock lenses so to maximize output efficiency you will want to get clear 2.5" lense
-has motors for bi-xenon
Pair of 2011 BMW X5 bi-xenon projectors ($80 OBO)
-with motor intact
Pair of 2010 Range Rover sport projectors ($80 OBO)
-matching 2 OEM valeo ballast ($100 OBO)
-I do have one d3s bulb what will come with purchase of projector or ballast
-bulb/ballast/projector have 46k miles on them
2000 acura Gsr OBD2B distributor ($BEST OFFER)
-went through the helms trouble shoot and found; it that the coil had failed
-the ICM and ignitor are still in working condition
-I believe the coils can he purchased at the dealership or at stores such as auto zone
-you can either use unit as parts or fixed to be used
-connector could he used to make different obd based distributor to fit whichever base as needed
(Team-integra has a nice write up on which distributors work for whichever bases emmisions system)
Contact
PM or by phone 253-929-9464
Mike
I have a few parts for a hid retrofit project
Pair of 2012 Lexus RX350 bi-xenon projectors ($150 OBO)
-these are one of the top 3 projectors used for retrofitting
-these have stock lenses so to maximize output efficiency you will want to get clear 2.5" lense
-has motors for bi-xenon
Pair of 2011 BMW X5 bi-xenon projectors ($80 OBO)
-with motor intact
Pair of 2010 Range Rover sport projectors ($80 OBO)
-matching 2 OEM valeo ballast ($100 OBO)
-I do have one d3s bulb what will come with purchase of projector or ballast
-bulb/ballast/projector have 46k miles on them
2000 acura Gsr OBD2B distributor ($BEST OFFER)
-went through the helms trouble shoot and found; it that the coil had failed
-the ICM and ignitor are still in working condition
-I believe the coils can he purchased at the dealership or at stores such as auto zone
-you can either use unit as parts or fixed to be used
-connector could he used to make different obd based distributor to fit whichever base as needed
(Team-integra has a nice write up on which distributors work for whichever bases emmisions system)
Contact
PM or by phone 253-929-9464
Mike
Thread
Thread Starter
Forum
Replies
Last Post
Apex i ITR
Acura Integra
64
03-08-2004 01:45 AM