Honda-Tech - Honda Forum Discussion

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)
-   Northwest (https://honda-tech.com/forums/northwest-85/)
-   -   good body shops and tuning shop in Portland area (https://honda-tech.com/forums/northwest-85/good-body-shops-tuning-shop-portland-area-3044800/)

weatherall123 04-07-2012 05:08 PM

good body shops and tuning shop in Portland area
 
I need a good body shop to weld on a front core support and front passenger apron, along with paint my entire car. I'm looking for the best quality work for the price.

Also, I'm looking for a good tuning shop that does reliable engine swaps the RIGHT way. No skipping steps. Too many horror stories out there.

Local is preferred. Thanks!

weatherall123 04-08-2012 11:26 PM

Re: good body shops and tuning shop in Portland area
 
Nobody?

EasternBandit 04-09-2012 09:07 AM

Re: good body shops and tuning shop in Portland area
 
I personally go to Track Forged in Troutdale for work done to my car that I don't do myself. Give them a call at 503-674-0293 and talk with them about what you want done.

I haven't had any body work done up there so I'm not able to recommend a body shop. I'm sure Forged gets feedback from customers about body shops so if you call them they should be able to point you in the right direction on that as well.

HdeucedeuceA 04-09-2012 06:49 PM

Re: good body shops and tuning shop in Portland area
 

Originally Posted by EasternBandit (Post 47162172)
I personally go to Track Forged in Troutdale for work done to my car that I don't do myself. Give them a call at 503-674-0293 and talk with them about what you want done.

I haven't had any body work done up there so I'm not able to recommend a body shop. I'm sure Forged gets feedback from customers about body shops so if you call them they should be able to point you in the right direction on that as well.

Everybody in the s2k community goes to Track Forged. I've only had them do a valve adjustment and baseline dyno run, but they were quick to get me in and were very knowledgeable. They're working on a J32 AP2 right now...if they can do that, then I'd assume most engine swaps would be easy.


All times are GMT -8. The time now is 09:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands