DC2many WTS/FS/WTB/WTT/misc threaD!
#54
Honda-Tech Member
Thread Starter
Join Date: Sep 2009
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Re: DC2many WTS/FS/WTB/WTT/misc threaD!
nankang 255/35/18 tires
mint 110 ea all under 500 miles of extremely light driving to prevent rubbage due to them not fitting AT ALL at the time
catback w/ no exhaust tips for 3rd gen Acura TL
220obo
should be direct fit to any 3rd gen TL (possibly accords or tsx??)
consist of 2.5" piping to 2.5" vibrant ultra quiet resonator (light scratches on underpart of casing) to 2.5" to 2.25" Y split
supply your own exhaust tips (or lack of) and hangers
*-=NEW UPDATE=-*
AP2 S2000 exhaust very good condition with oem oval tip 200obo
AP1 s2000 rear section with 2 mufflers no tips. Perfect for those wanting the OEM TWIN LOOP design/function application to their own car or any car, supply your own tips or maybe run none. 120obo
Extreme Dimensions (condition will be listed below in notes) front bumper, sideskirts, rear bumper for toyota 1G matrix (buddy of mine molded/covered the 2 sides and made a center cut out) some lady hit his car on the side before the sideskirts were even put on. They go for over 600$
Notes:
Front bumper - extremely good condition, no cracks, scratches etc
Sideskirts - Mint unpainted, unopened from packaging
Rear bumper - extremely good condition, also no cracks but some scratches on paint. The original exhaust cut out was molded in and a cutout was made in the center
*important* You would need to trim or mod your oem metal bumpers and/or support brackets, my friend still has his so you don't need to do it to your own if you decide to pick this kit up**
mint 110 ea all under 500 miles of extremely light driving to prevent rubbage due to them not fitting AT ALL at the time
catback w/ no exhaust tips for 3rd gen Acura TL
220obo
should be direct fit to any 3rd gen TL (possibly accords or tsx??)
consist of 2.5" piping to 2.5" vibrant ultra quiet resonator (light scratches on underpart of casing) to 2.5" to 2.25" Y split
supply your own exhaust tips (or lack of) and hangers
*-=NEW UPDATE=-*
AP2 S2000 exhaust very good condition with oem oval tip 200obo
AP1 s2000 rear section with 2 mufflers no tips. Perfect for those wanting the OEM TWIN LOOP design/function application to their own car or any car, supply your own tips or maybe run none. 120obo
Extreme Dimensions (condition will be listed below in notes) front bumper, sideskirts, rear bumper for toyota 1G matrix (buddy of mine molded/covered the 2 sides and made a center cut out) some lady hit his car on the side before the sideskirts were even put on. They go for over 600$
Notes:
Front bumper - extremely good condition, no cracks, scratches etc
Sideskirts - Mint unpainted, unopened from packaging
Rear bumper - extremely good condition, also no cracks but some scratches on paint. The original exhaust cut out was molded in and a cutout was made in the center
*important* You would need to trim or mod your oem metal bumpers and/or support brackets, my friend still has his so you don't need to do it to your own if you decide to pick this kit up**
Last edited by DC2many; 04-19-2013 at 12:47 PM.
#56
Honda-Tech Member
Thread Starter
Join Date: Sep 2009
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Re: DC2many WTS/FS/WTB/WTT/misc threaD!
*-=NEW UPDATE=-*
AP2 S2000 exhaust very good condition with oem oval tip 200obo
AP1 s2000 rear section with 2 mufflers no tips. Perfect for those wanting the OEM TWIN LOOP design/function application to their own car or any car, supply your own tips or maybe run none. 120obo
Extreme Dimensions (condition will be listed below in notes) front bumper, sideskirts, rear bumper for toyota 1G matrix (buddy of mine molded/covered the 2 sides and made a center cut out) some lady hit his car on the side before the sideskirts were even put on. kit goes for ~400$
Notes:
Front bumper - extremely good condition, no cracks, scratches etc
Sideskirts - Mint unpainted, unopened from packaging
Rear bumper - extremely good condition, also no cracks but some scratches on paint. The original exhaust cut out was molded in and a cutout was made in the center
*important* You would need to trim or mod your oem metal bumpers and/or support brackets, my friend still has his so you don't need to do it to your own if you decide to pick this kit up**
AP2 S2000 exhaust very good condition with oem oval tip 200obo
AP1 s2000 rear section with 2 mufflers no tips. Perfect for those wanting the OEM TWIN LOOP design/function application to their own car or any car, supply your own tips or maybe run none. 120obo
Extreme Dimensions (condition will be listed below in notes) front bumper, sideskirts, rear bumper for toyota 1G matrix (buddy of mine molded/covered the 2 sides and made a center cut out) some lady hit his car on the side before the sideskirts were even put on. kit goes for ~400$
Notes:
Front bumper - extremely good condition, no cracks, scratches etc
Sideskirts - Mint unpainted, unopened from packaging
Rear bumper - extremely good condition, also no cracks but some scratches on paint. The original exhaust cut out was molded in and a cutout was made in the center
*important* You would need to trim or mod your oem metal bumpers and/or support brackets, my friend still has his so you don't need to do it to your own if you decide to pick this kit up**
Thread
Thread Starter
Forum
Replies
Last Post
AMLS4dr200whp
Northeast (Sales)
12
02-02-2012 09:55 PM
FS: INTEGRA ITR and GSR STUFF: 94-97 OEM ITR lip, 94-97 GSR front and rear bumper, 94-97 all amber l
streetlights
For Sale
12
10-16-2003 09:55 PM