Bay Area NorCal FS WTT WTB OFFICIAL Thread. COMBINED!
#77
Re: (backseatDRIVER)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by backseatDRIVER »</TD></TR><TR><TD CLASS="quote">WTT: 16" Volk Gramlights gunmetal 4x100 for 99-00 Si rims/wheels plus cash
https://honda-tech.com/zerothread?id=1042350</TD></TR></TABLE>
https://honda-tech.com/zerothread?id=1042350</TD></TR></TABLE>
#78
Member
Join Date: Aug 2001
Location: San Francisco, CA, USA
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
Re: (d1deez)
1997 Acura Integra Type R B18C 210hp Swap w/ 15k miles
$4500 complete
$175 JDM ITR Cluster w/ 34,000 kilometers
1994 Honda Prelude H22a DOHC VTEC 200hp Swap w/ 35k miles
(5spd & AT available)
$2200 complete
$4500 complete
$175 JDM ITR Cluster w/ 34,000 kilometers
1994 Honda Prelude H22a DOHC VTEC 200hp Swap w/ 35k miles
(5spd & AT available)
$2200 complete
#79
Member
Join Date: Aug 2001
Location: San Francisco, CA, USA
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
Re: (d1deez)
I have 2 BRAND NEW Precision SC61 Turbo's that I'm not going to use:
SC61 w/ .52 or .69 trim exhaust housing
Up to 650-680hp
$675
***I also have a Precision intercooler***
SC61 w/ .52 or .69 trim exhaust housing
Up to 650-680hp
$675
***I also have a Precision intercooler***
#80
Member
Join Date: Aug 2001
Location: San Francisco, CA, USA
Posts: 1,256
Likes: 0
Received 0 Likes
on
0 Posts
Re: (d1deez)
Hasport Billet Mounts (BRAND NEW)
K series - K20 (2 sets)
Honda Civic EG (92-95), Civic EK (96-00), Del Sol (92-97), Acura Integra DC (94-01), and EP (2002+) applications.
PM or Email d1civic131@aol.com
K series - K20 (2 sets)
Honda Civic EG (92-95), Civic EK (96-00), Del Sol (92-97), Acura Integra DC (94-01), and EP (2002+) applications.
PM or Email d1civic131@aol.com
#81
Honda-Tech Member
Join Date: Oct 2003
Location: Bay Area
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Bay Area NorCal FS WTT WTB OFFICIAL Thread.
drag3 turbo manifold 250$
blitz dualstage bov :75$
2.5 custom downpipe (5 bolt flange) :100$
deltawastegate from drag kit: 75$
12:1 fmu: 50$
stock civic spoiler (paritally sanded) 25$
2 sports comp tachs:
phantom white faced with a shift light:100$
black faced
95 for integra gsr:
set of ace rebels 17's (silver): 250
Dc 4-2-1 header: $175 (SOLD)
aem cold air intake $100 obo
Jackson catylatic Concervter-$50 obo
Tanabe Super Racing Medallion - $200 obo
ITR Cams (400) (SOLD)
Brand new!! Cap and Rotor - 10(Both)
blitz dualstage bov :75$
2.5 custom downpipe (5 bolt flange) :100$
deltawastegate from drag kit: 75$
12:1 fmu: 50$
stock civic spoiler (paritally sanded) 25$
2 sports comp tachs:
phantom white faced with a shift light:100$
black faced
95 for integra gsr:
set of ace rebels 17's (silver): 250
Dc 4-2-1 header: $175 (SOLD)
aem cold air intake $100 obo
Jackson catylatic Concervter-$50 obo
Tanabe Super Racing Medallion - $200 obo
ITR Cams (400) (SOLD)
Brand new!! Cap and Rotor - 10(Both)
#82
Re: Bay Area NorCal FS WTT WTB OFFICIAL Thread. (crazzeboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crazzeboost »</TD></TR><TR><TD CLASS="quote">drag3 turbo manifold 250$
blitz dualstage bov :75$
2.5 custom downpipe (5 bolt flange) :100$
deltawastegate from drag kit: 75$
12:1 fmu: 50$
stock civic spoiler (paritally sanded) 25$
2 sports comp tachs:
phantom white faced with a shift light:100$
black faced
95 for integra gsr:
set of ace rebels 17's (silver): 250
Dc 4-2-1 header: $175 (SOLD)
aem cold air intake $100 obo
Jackson catylatic Concervter-$50 obo
Tanabe Super Racing Medallion - $200 obo
ITR Cams (400) (SOLD)
Brand new!! Cap and Rotor - 10(Both)
</TD></TR></TABLE>
got pics of the manifold/dp?
blitz dualstage bov :75$
2.5 custom downpipe (5 bolt flange) :100$
deltawastegate from drag kit: 75$
12:1 fmu: 50$
stock civic spoiler (paritally sanded) 25$
2 sports comp tachs:
phantom white faced with a shift light:100$
black faced
95 for integra gsr:
set of ace rebels 17's (silver): 250
Dc 4-2-1 header: $175 (SOLD)
aem cold air intake $100 obo
Jackson catylatic Concervter-$50 obo
Tanabe Super Racing Medallion - $200 obo
ITR Cams (400) (SOLD)
Brand new!! Cap and Rotor - 10(Both)
</TD></TR></TABLE>
got pics of the manifold/dp?
#84
Honda-Tech Member
Join Date: Apr 2003
Location: n o r, c a l
Posts: 1,621
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area NorCal FS WTT WTB OFFICIAL Thread. (crazzeboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crazzeboost »</TD></TR><TR><TD CLASS="quote">drag3 turbo manifold 250$
blitz dualstage bov :75$
2.5 custom downpipe (5 bolt flange) :100$
deltawastegate from drag kit: 75$
12:1 fmu: 50$
stock civic spoiler (paritally sanded) 25$
2 sports comp tachs:
phantom white faced with a shift light:100$
black faced
95 for integra gsr:
set of ace rebels 17's (silver): 250
Dc 4-2-1 header: $175 (SOLD)
aem cold air intake $100 obo
Jackson catylatic Concervter-$50 obo
Tanabe Super Racing Medallion - $200 obo
ITR Cams (400) (SOLD)
Brand new!! Cap and Rotor - 10(Both)</TD></TR></TABLE>
what's the size of the jackson cat?
blitz dualstage bov :75$
2.5 custom downpipe (5 bolt flange) :100$
deltawastegate from drag kit: 75$
12:1 fmu: 50$
stock civic spoiler (paritally sanded) 25$
2 sports comp tachs:
phantom white faced with a shift light:100$
black faced
95 for integra gsr:
set of ace rebels 17's (silver): 250
Dc 4-2-1 header: $175 (SOLD)
aem cold air intake $100 obo
Jackson catylatic Concervter-$50 obo
Tanabe Super Racing Medallion - $200 obo
ITR Cams (400) (SOLD)
Brand new!! Cap and Rotor - 10(Both)</TD></TR></TABLE>
what's the size of the jackson cat?
#85
Honda-Tech Member
Join Date: Feb 2003
Location: San Francisco, CA
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area NorCal FS WTT WTB OFFICIAL Thread. COMBINED! (b_cruz.)
FS:
ITR rear sway bar BRAND NEW! $80
Rear GSR leather gray seats (fits only EK hatch) -make me an offer.
ITR rear sway bar BRAND NEW! $80
Rear GSR leather gray seats (fits only EK hatch) -make me an offer.
#86
Honda-Tech Member
Join Date: Apr 2003
Location: AKA Sleepingeg6 BaY aReA, Ca, US
Posts: 3,184
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area NorCal FS WTT WTB OFFICIAL Thread. COMBINED! (ej0513)
Buddy Pro-spec complete catback for 92-95 civic hatch.
only 500 miles, mint condition all hardware. $Best offer Trying to sell asap.
only 500 miles, mint condition all hardware. $Best offer Trying to sell asap.
#87
Honda-Tech Member
Join Date: Apr 2003
Location: n o r, c a l
Posts: 1,621
Likes: 0
Received 0 Likes
on
0 Posts
Re: (non_VTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by non_VTEC »</TD></TR><TR><TD CLASS="quote">Helping a friend post:
5Zigen 16" Fn01R-C bronze 4x100 with Falken Ziex's
a little curbage, but otherwise the rims are excellent.
He's looking to get $700.
I'll get pix when i can.</TD></TR></TABLE>
5Zigen 16" Fn01R-C bronze 4x100 with Falken Ziex's
a little curbage, but otherwise the rims are excellent.
He's looking to get $700.
I'll get pix when i can.</TD></TR></TABLE>
#88
Honda-Tech Member
Join Date: Sep 2002
Location: Bay Area, Ca
Posts: 979
Likes: 0
Received 0 Likes
on
0 Posts
I'm selling a pair (passenger and driver) of JDM Civic Type R Red Recaro Seats. Selling them for $1100 OBO, but not below $1000!!! Also might be looking into trade for a USDM ITR 5 lug or a JDM CTR 5 lug in good condition. The lower the mileage the better!. These seats were just cleaned professionally, so you don't have to clean them. They both have generic rails for an EK. The driver side has the electrical harness under the seat to tell the gauge cluster you are buckled in, so you don't have to move it from the right seat to the left seat!
Now for the bad news. There are two small holes on the driver seat, but not very noticeable. The passenger seat is burnt, as seen in the pictures, on the side of it. The cover where the seat belt buckle is (Pics), is broken, but that goes where your armrest is, unless you don't have one, of course.
If you are interested or have any questions or have some 5 lugs sitting around, just PM me! I am only looking for buyers in the Bay to do local pick up, shipping is going to cost a lot, unless you are willing to pay for it!
Modified by ICU at 3:07 AM 11/18/2004
Now for the bad news. There are two small holes on the driver seat, but not very noticeable. The passenger seat is burnt, as seen in the pictures, on the side of it. The cover where the seat belt buckle is (Pics), is broken, but that goes where your armrest is, unless you don't have one, of course.
If you are interested or have any questions or have some 5 lugs sitting around, just PM me! I am only looking for buyers in the Bay to do local pick up, shipping is going to cost a lot, unless you are willing to pay for it!
Modified by ICU at 3:07 AM 11/18/2004
#90
Honda-Tech Member
Join Date: Oct 2002
Location: Bay Area, CA
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Re: (black cx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black cx »</TD></TR><TR><TD CLASS="quote">subscribed</TD></TR></TABLE>
#91
Honda-Tech Member
iTrader: (4)
Re: (Pssst!)
'98+ Integra OEM Optional Kit (Complete) in VSM (Vogue Silver Metallic.
Will let the complete kit go for $650. Or separate as follow:
01. OEM Optional Type-R Lip (Honda OEM Urethane) - $180 obo
02. OEM Optional Rear Valences (2pcs. Honda OEM) - $350 obo
03. OEM Optional Sideskirts (2pcs. Fiberglass Replicas, fit right over your stock ones) - $260 obo
A picture of the kit on my car (you can find more pix by looking up my H-T name using the search function):
Will trade for a Full OEM JDM ITR Front End Conversion, preferrably w/out H.I.D's. I'll add cash on my side of the trade.
Will let the complete kit go for $650. Or separate as follow:
01. OEM Optional Type-R Lip (Honda OEM Urethane) - $180 obo
02. OEM Optional Rear Valences (2pcs. Honda OEM) - $350 obo
03. OEM Optional Sideskirts (2pcs. Fiberglass Replicas, fit right over your stock ones) - $260 obo
A picture of the kit on my car (you can find more pix by looking up my H-T name using the search function):
Will trade for a Full OEM JDM ITR Front End Conversion, preferrably w/out H.I.D's. I'll add cash on my side of the trade.
#92
Honda-Tech Member
Join Date: May 2004
Location: Ride and Slide Through San Jo, NOR CAL, usa
Posts: 6,925
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DC4KiD)
im looking for a used n/a real apexi universal lmk if u got one
email thasjninjaturtles@yahoo.com or aim datz weaksauce
email thasjninjaturtles@yahoo.com or aim datz weaksauce
#95
Junior Member
Join Date: Dec 2003
Location: San Jose, CA
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
FS: B16 JE 81mm 9:1 Pistons & B16 Crower Rods (Barely Used $800 Shipped)
Hello,
I am selling this for a friend. This is basically what happened he got his motor built but when it was time to install he had a wiring problem which caused him to run PIG rich. Ended up washing the cylinder walls and the rings never seated properly. As you can see there are barely any miles on these parts. If you guys have any questions please feel free to ask. They come with everything u see here. Even comes with barely use OEM Honda Bearings.
$800 shipped
I am selling this for a friend. This is basically what happened he got his motor built but when it was time to install he had a wiring problem which caused him to run PIG rich. Ended up washing the cylinder walls and the rings never seated properly. As you can see there are barely any miles on these parts. If you guys have any questions please feel free to ask. They come with everything u see here. Even comes with barely use OEM Honda Bearings.
$800 shipped
#97
Honda-Tech Member
Re: Bay Area NorCal FS WTT WTB OFFICIAL Thread. COMBINED! (Advan06)
#98
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2004
Location: Takechi Project
Posts: 3,983
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area NorCal FS WTT WTB OFFICIAL Thread. COMBINED! (M3tor2nR)
Tons of parts for sale:
-92-93 GSR, B17A1, OBD1 P61 ECU, $200, very rare.
-B&M FPR, purple, already mounted on stock FPR, $20
-Complete set of OBD0 LS injectors, $40
-Complete set of OBD2 GSR injectors with all injector clips and wires with stock fuel rail, $80
-OBD0 starter from 91 LS, $30
-OBD0 alternator from 91 LS, $30
-Stock header from 91 LS, OBD0 with o2 sensor, will work for b-series swaps in EF also, $30
-Stock GSR header, $50 with heatshields.
-Stock Catalytic Converter from 91 LS, $25
-Neuspeed Ceramic Header for 92-93 Integras, will fit other b-series, has a small, easily fixible crack, $60
-Brand New, OEM Honda gsr headgasket, $50
-JDM 92-93 Integra front and rear bumpers, $100 for both or $60 front and $40 rear.
-OEM Passenger and Driver fenders for 90-93 Integras, excellent condition, $80 for both, $45 each.
-JDM DA window visors, brand new from PasswordJDM, still in box, $280
-JDM OEM Stanley 90-91 CRX corner lenses, will fit USDM front, $50
Lots more for sale, will update. Looking for LS crank pulley.
-92-93 GSR, B17A1, OBD1 P61 ECU, $200, very rare.
-B&M FPR, purple, already mounted on stock FPR, $20
-Complete set of OBD0 LS injectors, $40
-Complete set of OBD2 GSR injectors with all injector clips and wires with stock fuel rail, $80
-OBD0 starter from 91 LS, $30
-OBD0 alternator from 91 LS, $30
-Stock header from 91 LS, OBD0 with o2 sensor, will work for b-series swaps in EF also, $30
-Stock GSR header, $50 with heatshields.
-Stock Catalytic Converter from 91 LS, $25
-Neuspeed Ceramic Header for 92-93 Integras, will fit other b-series, has a small, easily fixible crack, $60
-Brand New, OEM Honda gsr headgasket, $50
-JDM 92-93 Integra front and rear bumpers, $100 for both or $60 front and $40 rear.
-OEM Passenger and Driver fenders for 90-93 Integras, excellent condition, $80 for both, $45 each.
-JDM DA window visors, brand new from PasswordJDM, still in box, $280
-JDM OEM Stanley 90-91 CRX corner lenses, will fit USDM front, $50
Lots more for sale, will update. Looking for LS crank pulley.
#99
Honda-Tech Member
Join Date: Nov 2001
Location: CALIFORNIA
Posts: 15,366
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area NorCal FS WTT WTB OFFICIAL Thread. COMBINED! (onecleanDA)
5zigen EK hatch Fireball 'rear' section muffler
will fit EG/EK hatch- make offer.
like new condition.
------------------------
Greddy SP EK exhaust rear section.
will fit EG/EK hatch- make offer.
used and a little dirty but good condition.
-----------------------------
Greddy B pipe EK hatch
front flange cut off and has a flexpipe welded on.
make offer.
will fit EG/EK hatch- make offer.
like new condition.
------------------------
Greddy SP EK exhaust rear section.
will fit EG/EK hatch- make offer.
used and a little dirty but good condition.
-----------------------------
Greddy B pipe EK hatch
front flange cut off and has a flexpipe welded on.
make offer.