Head porting needed in southeast pa
#3
Honda-Tech Member
Re: Head porting needed in southeast pa (tegedrex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegedrex »</TD></TR><TR><TD CLASS="quote">David @ Head Games is in Trenton, NJ probally one of the best</TD></TR></TABLE>
and you are looking at 2 grand for a done head by the mayor.
and you are looking at 2 grand for a done head by the mayor.
#5
Honda-Tech Member
Re: Head porting needed in southeast pa (tegedrex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegedrex »</TD></TR><TR><TD CLASS="quote">What? Did I miss something?</TD></TR></TABLE>
no, that is what it cost for Dave to perform his "magic" with his porting/polishing, installing a full ferrea valvetrain, valvejob, clean the head. its time consuming. + the ferrea valvetrain is around a grand by itself
no, that is what it cost for Dave to perform his "magic" with his porting/polishing, installing a full ferrea valvetrain, valvejob, clean the head. its time consuming. + the ferrea valvetrain is around a grand by itself
#6
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
Re: Head porting needed in southeast pa (dturbocivic)
i already have the valve train, all ferrea and i only paid 200 just looking to get it ported out and make sure the valve seats are all fresh, doing the work myself
#7
Honda-Tech Member
Join Date: Mar 2006
Location: Newark, DE
Posts: 6,381
Likes: 0
Received 0 Likes
on
0 Posts
Re: Head porting needed in southeast pa (dkk119)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dkk119 »</TD></TR><TR><TD CLASS="quote">i already have the valve train, all ferrea and i only paid 200 just looking to get it ported out and make sure the valve seats are all fresh, doing the work myself</TD></TR></TABLE>
Used because it dont cost that new, i got ferrea from the valves to the guides to the seals and it was over 1k
Used because it dont cost that new, i got ferrea from the valves to the guides to the seals and it was over 1k
Trending Topics
#8
Re: Head porting needed in southeast pa (dkk119)
turbotec... they can port an polish, good shop goodwork
call 609 685 9742
ask for wayne not to far from pa either, located in nj
call 609 685 9742
ask for wayne not to far from pa either, located in nj
Thread
Thread Starter
Forum
Replies
Last Post