Honda-Tech - Honda Forum Discussion - IN - FS Garage Cleanout (Turbo, Manifold, Sleeved Block, Hondata, etc.)

Cleaning out the garage. I've had this stuff for years and my life is in a different place, so I need this stuff gone. Many new and unused items. In the Avon, IN area.

→ Intercooler (New) $150 [Pick Up Only]
Tube and Fin
Core - 19" x 10.5" x 2.5"
Overall - 27" x 10.5" x 2.5"
Inlet/Outlet - 2.5"
Mounting - 1 threaded mount point on each left and right sides
https://cimg1.ibsrv.net/gimg/honda-t...f5c95a7937.jpg

→ P75 Head (w/titanium valve spring & retainers?) No cams/caps. FREE [Pick Up Only]
https://cimg3.ibsrv.net/gimg/honda-t...c63a18c657.jpg
https://cimg4.ibsrv.net/gimg/honda-t...0fd1e3c08d.jpg
https://cimg3.ibsrv.net/gimg/honda-t...2ea482920c.jpg

→ SMC500 (was working, but can not currently test) FREE [Pick Up or buyer pays shipping]
https://cimg8.ibsrv.net/gimg/honda-t...798a229a88.jpg

SOLD ITEMS

PR3-2 Head (mild intake porting started) Have stock caps, valves, springs. No cams, cap/valve cover bolts. GONE[Pick Up Only]

CircuitWorx Final Drive (4.7?) (Was noisey at high RPM last time I had it installed.) GONE [Pick Up Only]

1 OEM GS-R diff with ring gear (66T/1 line - 4.400) GONE [Pick Up Only]
1 B16 (forget what trans it came from, 99 Si maybe?) ring gear (66T/2lines - 4.400)
GS-R 1st: 13T/42T - 3.230
GS-R 2nd 20T/38T - 1.900
GS-R 3rd: 25T/34T - 1.360
GS-R 4th: 29T/30T - 1.034
LS 5th gear 35T/25T - 0.714
15T FD countershaft
The countershaft is missing the bearings, snap ring, washer and nut above the 5th gear

Jim-Fab Traction Bars (likely needs new heim joints) GONE [Pick Up Only]

EG/DC SS Brake Lines (New) GONE [Pick Up or buyer pays shipping]

Innovative Mounts GONE [Pick Up or buyer pays shipping]

Generic Short Shifter GONE [Pick Up or buyer pays shipping]

Innovative LC-1 Wideband O2 https://www.innovatemotorsports.com/products/lc1.php [SOLD]

Hardrace Roll Center Adjusters (New) HARDRACE GLOBAL - ROLL CENTER ADJUSTER - 6386 [SOLD]

Wiseco Pistons 81.5mm (New) [SOLD]

Eagle B18/B20 Rods (New) [SOLD]

S2000 Instrument Cluster [SOLD]

Healtech Speedohealerv4, Modifry Shift Beeper and ECT Module https://www.healtech-electronics.com/products/sh/ ECT-2 for S2000 [SOLD]

Aeroforce Oil Pressure and Fluid Temperature Sensors (New) [SOLD]

Integra Instrument Bezel [SOLD]

Injector Dynamics 725cc/min (New) ID725 Injectors - Injector Dynamics [SOLD]

ARP Head Stud Kit (New) The Official ARP Web Site Kits [SOLD]

Endyn Block Girdle (New) Endyn Block Girdle [SOLD]

Hondata S300 v1 w/Boost Hardware (Bought new and never used, so battery condition is unknown.) https://www.hondata.com/s300 [SOLD]

Generation 1 - Silver Surfer (w/compressor coating) (New) [SOLD]
https://honda-tech.com/forums/forced-induction-49/sls-shorty-stc-silver-surfer-tial-38mm-combo-deal-stock-ready-ship-2017644/

Manifold & Downpipe [SOLD]

Quote:

Well I am switching to a tial Vband housing so a new manifold has to be made. So I am selling my custom ram horn I had made by Silly_SOHC in Canada. The turbo comes with a lifetime warranty against cracking. If you have any problems I will take care of it personally. Pictures speak for themselves. This is a clean setup, it's sick. This was based off my old Full-Race AC manifold. Full-Race did not have the time to make me a closed loop dumptube w/3" Stainless steel downpipe. So I said screw it, I will just have someone copy my manifold and make me the setup I want. So here it is. The setup is not an exact FR copy, my manifold actually fits better than what they sent me. The person who made it made modification to the position of the turbo so it would work much better fitment wise.

The manifold is ceramic coated by performance coatings in Auburn, WA. Everything is in EXCELLENT CONDITION. There is a dent in the downpipe I made on purpose to clear the AC compressor better.

https://honda-tech.com/forums/classi...table-2107086/

Synapse Synchronic V-Band Wastegate (New) http://www.synapseengineering.com/su...G%20Manual.pdf [SOLD]

TiAL BOV (New) TiAL Sport - TiAL Q 50mm [SOLD]

EG/DC Aluminum Intercooler Piping (New) [SOLD]

Intercooler (New) [SOLD]

HRTuning Tunerview II Large (New) TunerView II Large ? Welcome to HRTuning [SOLD]

BDL B-Series Cam Gears [SOLD]

Aeromotive & Trick Flow Fuel Pressure Regulators, Intake Manifold Gaskets, Misc. Fuel and Oil AN Fittings (New) [SOLD]

Golden Eagle Manufacturing B18B1 81.5mm Sleeved Block (Unused) [SOLD]

LS crank [SOLD]

Thermal R&D 3" Exhaust B131-C131 (New) https://thermalrd.com/products/1994-...atback-exhaust [SOLD]

ITR Oil Pump [SOLD]