t57b18

have a shift box 30.00 plus shipping

blackcracker

K20a2 rebuilt bottom end with new rings and bearing decked and honed block,PRB z1 pistons and rods--800shipped

K20z3 head less then 5k miles-750$ shipped

K24a2 head new valve seals and valve locks,its been clean and reassembled-$800 shipped

vietxdragon

k20a2 head - threads on here and k20a.org - $500+shipping

xileap2

iTrader: (2)

Hey HT members. I have my BluePrintRacing Stg 3 cams for sale. They are for K series; k20a2, k20z1, k20z3, k24a2. They are used with 4k on them. Was planning on running them on my k24.k20 ef8 swap. Now have decided to go a different route. Pm me with any questions or offers. Im looking for $420 shipped. Here are pics I have from another thread I started.

http://k20a.org/forum/showthread.php?t=68631

xileap2

iTrader: (2)

hey guys, due to some mishaps and so many change of minds, I have decided to sell my Wiseco pistons that I had setup for my k24.k20. Im looking for $460 shipped. If you have any questions, just go ahead and pm:thumbsup:. I'll get more pics(will come with rings and pins)

What.

WTB aftermarket vt for 24a2 head

ysofasts2k

BLOCK K24A1 700 OBO BRAND NEW 0 MILES. was brought to machine shop to have all clearances checked and balanced the bottom end, all work done at JOHNS CHASIS AND CAGES MACHINE SHOP IN FT LAUDERDALE
HEAD K20A2 PORT AND POLISHED ETC 700 OBO
CAMS OBO
TYPE-S CAMS B16 CAMS LS CROWER TURBO CAMS
NEW TYPE-S OIL PUMP
K24 TIMING CHAIN BRAND NEW


ALSO HAVE 2 SETS OF INJECTORS PRECISION 880 AND RC ENGINEERING 440

95 Integra gsr

HEY GUYS CHECK OUT MY FOR SALE THREAD. TONS OF K SERIES PARTS... http://hondamarketplace.com/showthread.php?t=2691774

babyS2K

iTrader: (3)

Name : Vy
Means of Contact : PM
Location : Roanoke/Salem PICK UP ONLY!!!
Price : $1000.00
Trades : NO TRADES!!!
Description: K20a2 longblock, less than 40k miles, as far as I know, it has a spun rod bearing and the bottom end needs to be gone through to check to see if there might be anything else. Should be a good donor motor for anyone looking to rebuild the bottom end to turbo. The motor was like that when I bought the car, had a loud knocking, but still ran
Longblock is current at my friend's house and here are some pictures that he took

SIXTY

RBC intake manifold, modified already to fit k20a2 k24a1 etc head. Comes with 64mm omni power throttle body adapter plate. Very clean, barely used - $225 shipped

Type-s k20a2 head, complete with stock valvetrain, stock cams, rockers etc. Freshly hotanked very clean - $750 shipped, or $550 shipped bare.

Castillos kseries 101.6mm crankshaft freshly dobe ready to use - $650 shipped

Paypal verified premier member, tons of transactions on here and k20a.org (member name sicKstee) and ebay (member name b1886crx). Buy with confidence. PM ME or e-mail me at b18bomber-86crx@hotmail.com , thanks.

6SPD_EK

iTrader: (2)

Rockers & cam caps in very good condition no unusual wear or damage. Complete with all pins & springs $325 shipped OBO


Toda Valve springs BNIB $375 shipped OBO

pics

seto519

i got my k20a2 for sale. comes with everything cept for tranny. pm me offer. it has 100k on it

sc34dx

Just a few leftover k swap parts...add paypal and shipping into the prices listed.

BRAND NEW innovative ed/dc kswap mounts, custom anodized purple...$400

BRAND NEW eagle k24 rods...$375

What.

WTB full aftermarket VT. shifter cables. starter. alternator.

ysofasts2k

bump bump bump still for sale

AllMoToRB18c

What's up everyone. Im selling my Allenbuilt Shortblock that I ran this past season. It only has 8 races on it. Its a 90x99 with custom CP pistons and custom InlinePro rods with ACL race bearings. Im listing a breakdown of what it would cost to build this new so you can have an idea. This is not a list of parts that I am selling and I will not part out the shortblock.
Stock K24 shortblock-$400
Custom CP pistons-$800
Custom InlinePro rods-$800
AEBS sleeves by InlinePro-$1275
ACL race bearing set-$160
OEM k20 oil pump-$145
Labor shortblock assembly by Jeremy Allen-$1250

Im looking to get $3300 obo for this shortblock. Its in great shape and the compression test in all four cylinders were damn near dead even. Only things that are missing is the timing chain and timing chain cover. Im not looking for any type of trades. Please bump if you read this. Now on with the pics.

What.

WTB

starter, alternator for K24 frank

AnT PERFORMANCE

2008 Civic SI complete swap with 6000 miles. Comes complete with engine harness. Motor has never been taken apart and its clean as hell. Parting ways with my plans. I will also include the axles shifter cables and the hybrid racing speed convertor so u can use this tranny properly in your swap. Has the awesome 4.7 final drive tranny with oem lsd! Taking best offers pm is best

AnT PERFORMANCE

Change of plans, selling just the transmission and hybrid convertor only! Asking 1000 for tranny and convertor 5593263621 Call or text

beavis

Skunk 2 exhaust cam gear used $100shipped
Type S throttle body with IAC block off plate and evap plugged. includes tps $120shipped
Stock type S pistons $50shipped
Type S rocker set, pins, springs, shaft. $100 shipped
Assorted K series ign. coils. Make offer
K20a2 crank pulley $40 shipped.
K24a1 crank $150 shipped.

PM me if your interested and for pictures

Was Go n 4 10s

PM'ed:

ysofasts2k and beavis on items you are selling

asapkraz76

i have both good k24 long block with ep3 sir head for sale let me know 209-298-5677

GUILOTINE

FS: Slightly used, about 200 total miles on it, authentic SSR/DTR 4-2-1 K-Series header. Header is constructed out of H.D. mild steel but has been painted with high temp paint. Retail price for header is $950 + tax and shipping with a 6 week wait.
Asking $800 shipped obo
Paypal gladly accepted

Details from SSR's website
http://www.sixsigmaracing.com/k4-2-1Stainless.htm
Excellent for mild to wild motors, this header is definitely what every K-motor needs. Perfect for daily driven cars, the tri-Y design broadens the powerband allowing more useable horsepower throughout the entire RPM range. SSR Engineering has been working with many of the most popular mount kit companies to insure that each header fits perfectly depending on the installed mount kit. Every header is custom made in house and we have designed our headers for both the K-20 and K-24 engines.


pics of actual header

very small scrape at bottom


Blueprint Stage 3 cams with less than 50 miles.
$600 shipped with Cam Gear set
$550 shipped without gears


K24 driverside engine bracket. $30 shipped


Goodyear drive belt. Correct size for AEM/STR 3-pulley setup on K-Series. Brand new
$15 shipped


Custom Billet Aluminum Breather kits. Comes with AN fittings, mounting brackets, and hoses. Complete custom kits.
"3" Kits with -8an fittings $170 + shipping
"3" Kits with -6an fittings $150 + shipping


Kit powdercoated black with teflon lines installed on out race car

What.

where does that breather kit pull vacuum from?

GUILOTINE

It's a valve cover breather. Doesn't need vacuum