270whp K24A / k20a2 Recipe with dynos
#127
Honda-Tech Member
Join Date: Oct 2005
Location: BRICKTOWN, NEW JERSEY, USA
Posts: 1,393
Likes: 0
Received 2 Likes
on
2 Posts
So Lets say you had the head and what not
You basically can get the motor for a grand, then wit the pistons,rods, bearings, and what not
you got a 270 whp N/a engine for 2 grand.. thats pretty nasty
You basically can get the motor for a grand, then wit the pistons,rods, bearings, and what not
you got a 270 whp N/a engine for 2 grand.. thats pretty nasty
#129
Re: 270whp K24A / k20a2 Recipe with dynos (jdm_ef9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_ef9 »</TD></TR><TR><TD CLASS="quote">Lookin good guys! It was nice to see the car out again...
</TD></TR></TABLE>
it was nice to meet you as well.. Good luck with the car.. If you ever decide to ditch the bseries, let us know and we can help out with spare K parts
here's a pic of your bay, in case you don't recognize it
</TD></TR></TABLE>
it was nice to meet you as well.. Good luck with the car.. If you ever decide to ditch the bseries, let us know and we can help out with spare K parts
here's a pic of your bay, in case you don't recognize it
#130
Member
Join Date: Mar 2007
Location: Eastern, Ma, USA
Posts: 1,701
Likes: 0
Received 0 Likes
on
0 Posts
Re: 270whp K24A / k20a2 Recipe with dynos (Nikos)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nikos »</TD></TR><TR><TD CLASS="quote">
it was nice to meet you as well.. Good luck with the car.. If you ever decide to ditch the bseries, let us know and we can help out with spare K parts
here's a pic of your bay, in case you don't recognize it
</TD></TR></TABLE>
WHAT INTAKE MANIFOLD AND TB COMBO WAS USED FOR THIS SETUP?
it was nice to meet you as well.. Good luck with the car.. If you ever decide to ditch the bseries, let us know and we can help out with spare K parts
here's a pic of your bay, in case you don't recognize it
</TD></TR></TABLE>
WHAT INTAKE MANIFOLD AND TB COMBO WAS USED FOR THIS SETUP?
#134
Honda-Tech Member
Re: 270whp K24A / k20a2 Recipe with dynos (Nikos)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nikos »</TD></TR><TR><TD CLASS="quote">
it was nice to meet you as well.. Good luck with the car.. If you ever decide to ditch the bseries, let us know and we can help out with spare K parts
</TD></TR></TABLE>
Thanks! I'll keep that in mind about the K parts.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20beast978 »</TD></TR><TR><TD CLASS="quote">
WHAT INTAKE MANIFOLD AND TB COMBO WAS USED FOR THIS SETUP?</TD></TR></TABLE>
Un-ported BLOX manifold matched to a RPM Service 74/72mm TB.
it was nice to meet you as well.. Good luck with the car.. If you ever decide to ditch the bseries, let us know and we can help out with spare K parts
</TD></TR></TABLE>
Thanks! I'll keep that in mind about the K parts.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20beast978 »</TD></TR><TR><TD CLASS="quote">
WHAT INTAKE MANIFOLD AND TB COMBO WAS USED FOR THIS SETUP?</TD></TR></TABLE>
Un-ported BLOX manifold matched to a RPM Service 74/72mm TB.
#136
Re: 270whp K24A / k20a2 Recipe with dynos (ferio82)
thanks, here are a few more pics
At 9000 RPM, duty cycle is at 30%.. using 950cc injectors.. Planning ahead for E85 lol... not really... just got these off norris when I visited his shop
At 9000 RPM, duty cycle is at 30%.. using 950cc injectors.. Planning ahead for E85 lol... not really... just got these off norris when I visited his shop
Thread
Thread Starter
Forum
Replies
Last Post