wiring with existing wires
06-29-2004, 11:54 PM
#1
Thread Starter
Join Date: Feb 2004
Location: Birmingham/Huntsville, Al, U.S.A
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
wiring with existing wires
Can someone tell me which strut tower harness the knock sensor and IAB wires go to? It appears that the pink/blue wire from the IAB terminate on the drivers side harness, but I can't find where the 12v wire and knock sensor end up.
Also, when you plug in the engine harness plugs to the firewall harness, of course, some wires like the KS and IAB won't match the wires that they are meeting up with. Wouldn't it just be easier for me to move which ever wire on the firewall side that meets the KS and IAB to correct pins on the ecu instead of running all new wires?
I know people have been doing swaps forever and I'm not trying to "reinvent the wheel", but I'm just trying to make things easier.
Also, when you plug in the engine harness plugs to the firewall harness, of course, some wires like the KS and IAB won't match the wires that they are meeting up with. Wouldn't it just be easier for me to move which ever wire on the firewall side that meets the KS and IAB to correct pins on the ecu instead of running all new wires?
I know people have been doing swaps forever and I'm not trying to "reinvent the wheel", but I'm just trying to make things easier.
Thread
Thread Starter
Forum
Replies
Last Post
crxaddikt
Tech / Misc
1
07-08-2017 07:56 PM