runeminaEF9

well, i went to the honda dealership in an attempt to purchase ECU pins but they said they cant sell them to me. i talked to the head tech, who explained that they dont sell them, but they have the repair kits in the back which have tons of different pins. i told him the swap i had, and what ECU and everything, and i said i'd give him whatever he wanted for a few of them, but he just kept saying that he couldnt sell em......WHAT A DOUCHEBAG! i need the pins to wire up my knock sensor and vtec on my b16a. anyone know of a place where i can purchase pins for a PR3 ecu? the swap is in an 89' civic SI hatch. the car is currently not driveable, but i'm trying to wrap up a few loose ends on the wiring. a friend of mine said there might be extra pins on my harness i can use, but i dont have the removal tool even if i did know which ones to pull.......any ideas?

p.s. tried to search this earlier, but the search engine was down......again

HondaPartsHero

I have OBD0 and OBD1 pins in stock, as many as you need, Check out my website, http://www.hondapartshero.com. $1 a piece, let me know

MrMike

go to the junkyard pull it from a wrecked car and put it in your pocket.

slamef

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MrMike &raquo;</TD></TR><TR><TD CLASS="quote">go to the junkyard pull it from a wrecked car and put it in your pocket. </TD></TR></TABLE>


Exactly

TrueNorthStar

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaPartsHero &raquo;</TD></TR><TR><TD CLASS="quote">I have OBD0 and OBD1 pins in stock, as many as you need, Check out my website, http://www.hondapartshero.com. $1 a piece, let me know</TD></TR></TABLE>

Uncrimped pins or pigtails?
Bulk discounts?
TIA

HondaPartsHero

Crimped pins straight from the harness with wire (pigtails), PM me we can work something out with prices for bulk

TrueNorthStar

Damn, I need new un-crimped pins

runeminaEF9

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MrMike &raquo;</TD></TR><TR><TD CLASS="quote">go to the junkyard pull it from a wrecked car and put it in your pocket. </TD></TR></TABLE>

if you expect to pull that off in my town then you better be the invisible man, cuz around here, they dont let anyone get near the salvage lots without an employee to escort them around the lot. i remember the days where anything that could fit in your pocket was free, but not anymore......not around here.

runeminaEF9

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaPartsHero &raquo;</TD></TR><TR><TD CLASS="quote">Crimped pins straight from the harness with wire (pigtails), PM me we can work something out with prices for bulk</TD></TR></TABLE>

that would be nice, but i dont need bulk....probly just 5 or so, incase i need a few extras.......i'll be ordering from your site soon.

HondaPartsHero

thats sounds good whenever, 5 or 500 I can do whatever you need, its free shipping on the pins also

runeminaEF9

free shipping.....excellentay! one other thing...i need them for a pr3 ecu.....for vtec solenoid, pressure switch, and knock....... not sure which ones are A side or B & C side......i need to go out and check

p.s. you have a great site for swap wiring odds and ends. i will reccommend your site to everyone i know who has swap wiring needs. an A+ for you, and thanks for your help




Modified by runeminaEF9 at 2:38 PM 2/17/2006

HondaPartsHero

this should be it I believe

you should need one large and two small pins

93civic_sedan

Junkyard for the win, its where I have gone. You can just get some plugs and then push the pins out...

hapexamendios 2.0

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MrMike &raquo;</TD></TR><TR><TD CLASS="quote">go to the junkyard pull it from a wrecked car and put it in your pocket. </TD></TR></TABLE>bingo

runeminaEF9

haha. hondapartshero, that diagram is awesome.....i've got one similar, but not with the colored marks and pointers.......thanks again, and i should be ordering from you by monday at the latest.

runeminaEF9

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93civic_sedan &raquo;</TD></TR><TR><TD CLASS="quote">Junkyard for the win, its where I have gone. You can just get some plugs and then push the pins out...</TD></TR></TABLE>

as i already mentioned, the ones around here are like fort knox, so if you wish to steal then you'll be doing it with an employee 2 feet away watching your every step. i'd much rather pay five bucks for what i need and have it shipped to my doorstep. logically it would cost me MORE money and time to steal from a junkyard. even if i drove to the nearest salvage yard, i'd still spend more money in gas than i would spend buying the parts online. so instead of wasting time and gas money illegally stealing parts, i'll order them from hondapartshero and thouroughly enjoy sitting on my lazy *** till they get here.

MrMike

its not really stealing. At the "Pick-N-Pull" yards around here you will never beable to find a whole wiring harness cuz everyone has wripped it to pieces taking the wiring connected to the parts, so wiring is pretty much worthless. I would never pay for wiring unless it were complete. So usually i go there to buy some parts and i score some spare wiring and some nuts and bolts and other odds and ends.

runeminaEF9

taking ANYTHING from a yard around here without paying is like stealing. no matter if its a 200 part you're taking, or a lugnut, they still consider it stealing.......thats why the gates to the salvage lots are locked at all times and the only way to gain entrance to the cars is to wait for an employee to escort you around the lot.......right by your side the whole time. even if you asked to take some cheap wiring or worthless crap that they couldnt sell, they will still try to crack your head for it. they would rather see a worthless part rot on a car than give it away for free......i know you guys are trying to help, but its pointless to keep suggesting that i jack parts from the junkyard cuz i've already mentioned i'd probly get caught in the process ,and it would cost me more money in gas to get there than it would just to buy the crap online. and on top of that...theres no "pick-n-pull" yards anywhere NEAR here, hence the reason why i cant get what i need by myself.

A L I A S

if you lived in NOVA i could hook it up..(i know the repair kits the douchebag dude at the honda dealership by you was talkin about...we have the same repair kits at our honda dealership )but yeah...he deff should have givven you them..we dont sell those...we just give them to the mechanics when they ask for them...dude was a ********..what you should do is walk into the garage at honda and ask one of the mechanics to go get you some

runeminaEF9

yeah, this particular honda dealership has turned a blind eye to me quite a few times in the past when i was looking for swap parts.......theres something about the words "acura" and "motor swap" that the honda parts guys dont like too much. its funny.....they dont give a damn about helping me out, but the second i walk out that parts department and hit the sales floor, i've got sales associates all over my *** like stink on $hi+ tryin to sell me a car

Lord Helmet

Ever thought of about just going to a computer parts store? they have pins for the ecu. that's where I go if the junkyard is too much of a hassle or don't have it.

runeminaEF9

i orderd the parts from your site today.....thanks for the help hondapartshero. in another week or two i'll probly order some more pigtails, as well as vtec and pressure switch plugs.

HondaPartsHero

sent out the package this morning, thanks