What Headers are out there for K20 in EG/EK=BOLT ON
#1
What Headers are out there for K20 in EG/EK=BOLT ON
Basiclly with this swap becoming so popular i was wondering where or who we could get bolt on headers that work and look good. For K20's in EK and EG's Thanks in advance
#2
Honda-Tech Member
Join Date: Jan 2002
Location: New York, NY, United States
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Headers are out there for K20 in EG/EK=BOLT ON (EK K20)
I just ordered one from DTR fab.......he is just finishing up eveything.....there is quite a few people working on them, but nothing is really proven yet, so at this point you really just have to go on reputation
#3
Re: What Headers are out there for K20 in EG/EK=BOLT ON (EK K20)
According to 6spdEG the stock or aftermarket TSX header will work for K20 eg/dc swaps.
Here's his post:
https://honda-tech.com/zerothread?id=845972
#6
Honda-Tech Member
Re: What Headers are out there for K20 in EG/EK=BOLT ON (Googs16)
The TSX exhaust header hangs below the engine when using the Hasport kit. The engine must mount rather high in the TSX. Several companies are working on a header including Hasport.
brian g
brian g
#7
Re: What Headers are out there for K20 in EG/EK=BOLT ON (brian g)
k2oeg has one.... http://www.k20a.com or IM K2oEG
Trending Topics
#8
Honda-Tech Member
Join Date: Jan 2002
Location: New York, NY, United States
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
#9
Re: What Headers are out there for K20 in EG/EK=BOLT ON (909rex)
Checked this out and said ERROR - wouldn't let me look at the site ???? But I did find a thread he started with hookup and they posted a dyno sheet with good numbers, I remember asking along with otheres to see the A?F and got alot of excuses and still to this day it is not posted ??? What do you think.
#10
Honda-Tech Member
Join Date: Feb 2003
Location: San Leandro, CA, USA
Posts: 1,917
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Headers are out there for K20 in EG/EK=BOLT ON (EK K20)
here is something to look at
i've been working on this for about 3 weeks.. this is a unfinished prototype K-20 high RPM street/race header for the new "swap craze" EG/EK/DC2 chassis. Ill try to get some picture of this header in a car sometimes next week with ground clearence and connected to exhuast system..
i've been working on this for about 3 weeks.. this is a unfinished prototype K-20 high RPM street/race header for the new "swap craze" EG/EK/DC2 chassis. Ill try to get some picture of this header in a car sometimes next week with ground clearence and connected to exhuast system..
#12
Honda-Tech Member
Join Date: Feb 2003
Location: San Leandro, CA, USA
Posts: 1,917
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Headers are out there for K20 in EG/EK=BOLT ON (EK K20)
they are already in production.... JDKindle has already ordered a race version that should be completed near the end of this week
#13
Honda-Tech Member
Join Date: Jan 2002
Location: New York, NY, United States
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Headers are out there for K20 in EG/EK=BOLT ON (DTRFAB)
I hope my check even gets there by the time you are done!
Great turnaround time
#14
Re: What Headers are out there for K20 in EG/EK=BOLT ON (DTRFAB)
Do you have pricing - will there be retail and wholesale and also you said RACE ?? Will it still be able to bolt up to exhaust, the pics show a flange will they all come with one?
#15
Honda-Tech Member
Join Date: Oct 2003
Location: Bellevue, WA, USA
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Headers are out there for K20 in EG/EK=BOLT ON (DTRFAB)
What are the primary dimensions? Race dimension differences?
Will the set include a cat eliminator section like JRSC does?
Will the set include a cat eliminator section like JRSC does?
#17
Honda-Tech Member
Join Date: Jan 2002
Location: New York, NY, United States
Posts: 1,080
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Headers are out there for K20 in EG/EK=BOLT ON (dohcturtle)
haha.....they are always working on stuff, but nothing ever comes out
#18
Honda-Tech Member
Join Date: Feb 2003
Location: San Leandro, CA, USA
Posts: 1,917
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Headers are out there for K20 in EG/EK=BOLT ON (EK K20)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EK K20 »</TD></TR><TR><TD CLASS="quote">Do you have pricing - will there be retail and wholesale and also you said RACE ?? Will it still be able to bolt up to exhaust, the pics show a flange will they all come with one?</TD></TR></TABLE>
The street version is what seen above it does come with a standard 2 bolt flange for a 2 1/2 collector. the race version will be built custom to engine and will include different tail pipes/megaphones ect.
right now street header are retailed at $1100 for 4-1.... $1180 for 4-2-1 in 304 stainless shipped...
race headers will have to call for pricing...
The street version is what seen above it does come with a standard 2 bolt flange for a 2 1/2 collector. the race version will be built custom to engine and will include different tail pipes/megaphones ect.
right now street header are retailed at $1100 for 4-1.... $1180 for 4-2-1 in 304 stainless shipped...
race headers will have to call for pricing...
#19
Re: What Headers are out there for K20 in EG/EK=BOLT ON (DTRFAB)
The header looks great!!
Let me know what you think about that PM.
This is a pic of the comptech installed on the car.
Modified by hybrid racing at 4:38 AM 6/14/2005
Let me know what you think about that PM.
This is a pic of the comptech installed on the car.
Modified by hybrid racing at 4:38 AM 6/14/2005
#20
Re: What Headers are out there for K20 in EG/EK=BOLT ON (DTRFAB)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DTRFAB »</TD></TR><TR><TD CLASS="quote">they are already in production.... JDKindle has already ordered a race version that should be completed near the end of this week</TD></TR></TABLE>
How close to equal length is that?
How close to equal length is that?
#22
Re: What Headers are out there for K20 in EG/EK=BOLT ON (chameleon)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chameleon »</TD></TR><TR><TD CLASS="quote">lets bring this back from the dead.. pics of the hytech ?</TD></TR></TABLE>
short.
long.
short.
long.
Thread
Thread Starter
Forum
Replies
Last Post
10cjennings
Florida (Sales)
6
07-20-2014 11:26 AM
10cjennings
For Sale
4
07-20-2014 11:26 AM
VtecKiDD
Performance
42
10-05-2010 07:52 PM