Weird CEL on H22 EG
07-07-2014, 07:46 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Weird CEL on H22 EG
Hey guys I'm finally to the point of making a new thread as I've searched and searched with no results and thought if anyone could help me it would be you guys. Here's the short version of my strange problem.
'95 JDM H22 EG - OBD1
Replaced:
If i think of more I'll list it later but anyways, I get a CEL ONLY while the engine is running, I've pulled quite a few CELs successfully but not this one! So I have to attempt to pull the code with the engine running and the light is very weak. It appears to be a code 1 Heated oxygen sensor A and a code 8 Top dead center sensor. This light kind of gradually appeared. The car runs great Vtec and all. I'm down to just replacing the whole dizzy as it's internal on the JDM models. Any input would be greatly appreciated!
'95 JDM H22 EG - OBD1
- Harness: Hasport.
- Axles: Hasport.
- Plugs and wires: NGK.
- ECU: Chipped P28 from Phearable.
Replaced:
- 02 Sensor
- Radiator (full size)
If i think of more I'll list it later but anyways, I get a CEL ONLY while the engine is running, I've pulled quite a few CELs successfully but not this one! So I have to attempt to pull the code with the engine running and the light is very weak. It appears to be a code 1 Heated oxygen sensor A and a code 8 Top dead center sensor. This light kind of gradually appeared. The car runs great Vtec and all. I'm down to just replacing the whole dizzy as it's internal on the JDM models. Any input would be greatly appreciated!
Thread
Thread Starter
Forum
Replies
Last Post
