navin

iTrader: (1)

Alright well I do not have a Helms on me and I need to make space in my garage quick, so im taking the tranny of my motor which is chilling on a palet right now. Any suggestions on how to do this and step by. step directions? Also I need to drain the tranny fluid too, need to know how to do this. All help is appreciated..

BTW - pics do help

navin

iTrader: (1)

Tom - im looking your way

paulzy

iTrader: (1)

tranny fluid should be drained already if the axles are out. As for taking the tranny off, there's about 7-8 bolts holding it to the block. bolts have 17mm heads...starter bolts have 14mm heads...the tranny bolts are mostly on the tranny side, but there are like 2 coming from block to tranny under the block

Trey

It's really easy, just make sure to take off the starter as well.

DR. ON POINT

make sure u remove the starter bolts completly

navin

iTrader: (1)

gotcha - thanks all. Better get a helms too