93preludeh22

Doing a h22 swap into EG hatch CX model.

I need help with it.. I will pay whoever helps out cash.

Let me know if you're interested. I have a garage to work in, tools needed, all parts.

I live in Bel Air, Maryland.

Thanks,

Anthony
cytokin@yahoo.com

93preludeh22

Supervision and help required.. I can do most of the heavywork

93preludeh22

Will pay... nobody wants $$ ??

gambo117

let me know when you wanna do it, or whatever, ill be willing to help out. gambo117@hotmail.com or call me 443-850-6062. i can help after 5 on weekdays, sun after3.

93preludeh22

have you done this swap before?

I've never done a swap before.. but I'm handy with tools.

93preludeh22

take my money!!

Root Beer

call TSR in glen burnie, they might be able to hook you up with somebody...those guys know their stuff

JohnnieChimpo

Does the EG run?
Can you drive it to York, Pa (I-83)?
My buddy has swapped his H22 into two different EGs.
We just did the 2nd one last week.
If it doesn't run do you have AAA?
I have a rollback at work.
Have shop with lift, air and tools.
Do you have EVERYTHING needed for the swap?

MADPROPS

Call IMPORT SPORTS in Glen Burnie The new owner Steve is real good with engine swaps Their phone # is 410-553-6910 They have a race car with a h22 in it that runs great

93preludeh22

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JohnnieChimpo &raquo;</TD></TR><TR><TD CLASS="quote">Does the EG run?
Can you drive it to York, Pa (I-83)?
My buddy has swapped his H22 into two different EGs.
We just did the 2nd one last week.
If it doesn't run do you have AAA?
I have a rollback at work.
Have shop with lift, air and tools.
Do you have EVERYTHING needed for the swap?</TD></TR></TABLE>

The car does run with the stock motor. I have almost everything for the swap. Missnig slim fan, tensioner belt, lower rad hose, clutch/pp/flywheel,... i think that's it

MADPROPS

I would call Steve he can get you the rest of you parts and install the engine, great prices and awesome work they do very clean swaps

Turbogixxer

Drive it to FL

93preludeh22

turbogixxer, I'd love to drive it to FL. I definately know you'd do it right

I'd rather not have a shop do it,.. I found someone locally that'll help me with it.

I just need to get the last parts in and I'll start it.

93preludeh22

I really need to sell my freaking CR-V... that would help out my current debt! :thumbdn:

Turbogixxer

Whats the biggest thing you are afraid of? shifter holes? wiring?

93preludeh22

wiring

dwnthehatch

iTrader: (1)

PM smnowell or sander from mixed motorsports.

93preludeh22

ok.. car failed MD State Inspection today becuase of lower ball joints having too much play.... They wanted $450 to replace them !

This sucks.

93preludeh22

what can I buy that will include lower ball joints?

93preludeh22

GSR brake conversion from hmotorsonline.com ($250) would this include the lower ball joint??

93preludeh22

if purchased separately, which parts do i need?

http://www.hondaautomotivepart...UCKLE

RotiEatter

iTrader: (1)

Damn, strict inspections!

Turbogixxer can do the wiring harness for you and send it back.

Turbogixxer

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93preludeh22 &raquo;</TD></TR><TR><TD CLASS="quote">if purchased separately, which parts do i need?</TD></TR></TABLE>

#4. You need to take the spindle out and take it to a machine shop (or a friend that can do it) to have the old and new ball joint pressed in and out.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter &raquo;</TD></TR><TR><TD CLASS="quote">Turbogixxer can do the wiring harness for you and send it back. </TD></TR></TABLE>

Yep, yep

93preludeh22

sounds like a lot of work gixxer

Turbogixxer

it is not. It takes me like 15 mins to rip the spindles. It is not hard!