SP GARAGE 2.0 build thread
#1
SP GARAGE 2.0 build thread
after talking to a few friends on here about making a thread... we finally decided to make one to show our builds.
our first time out with the car 9/5/09 BOTI. it ran a horrible 13.3 with no second gear and misfiring issues
the motor it ran. the 13.3 was with a 90x90.7 with a S4C tranny that had a Mfactory 4.928 final drive, mfactory 3.070 first gear and wavetrac LSD. we know we should have went into the 11's but it was the first time the car had been out in 2 years from being built from scratch.
ran with a plenum and 70mmTB along with pro3's and q16. it made 248 with a misfiring issue and we ran out of race gas on the dyno.it had alot more in her.
soon after that we started to work on the chassis
Few things came in from our friends @ QSD.. thanks seth
thats it for now .... i have more pics i have to load and i have to get going will be posting up more soon
our first time out with the car 9/5/09 BOTI. it ran a horrible 13.3 with no second gear and misfiring issues
the motor it ran. the 13.3 was with a 90x90.7 with a S4C tranny that had a Mfactory 4.928 final drive, mfactory 3.070 first gear and wavetrac LSD. we know we should have went into the 11's but it was the first time the car had been out in 2 years from being built from scratch.
ran with a plenum and 70mmTB along with pro3's and q16. it made 248 with a misfiring issue and we ran out of race gas on the dyno.it had alot more in her.
soon after that we started to work on the chassis
Few things came in from our friends @ QSD.. thanks seth
thats it for now .... i have more pics i have to load and i have to get going will be posting up more soon
Last edited by SP GARAGE; 09-11-2010 at 08:35 AM.
#5
Re: Flatbush Projects build thread
looking good thinking of sleeving my block and going 90 but i dd mine so idk >< heard the head gasket is hard to seal at 90. Wish you good luck!
Trending Topics
#10
I'm really 2slow
#16
King of the One Liners
Re: Flatbush Projects build thread
Single axle trailer huh . . Crazy mo fo . .
Just glad to see you finally at the track enjoying some of your hard work over the years homie
Just glad to see you finally at the track enjoying some of your hard work over the years homie
#25
Re: Flatbush Projects build thread
heres some pics from tonight.... disassembling the motor for shootout in jersey
head is getting ready to back to steve@CCcylinderheads.com for some more work
some pics of the block
head is getting ready to back to steve@CCcylinderheads.com for some more work
some pics of the block