some pics, B20B pistons/rods vs endyn/wiseco&eagle
05-21-2002, 05:30 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2001
Location: Toronto, Ontario, Canada
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
some pics, B20B pistons/rods vs endyn/wiseco&eagle
just thought I would share...B20B dished pistons(my block is stamped 97) and stock B20B rods vs endyn/wiseco 84.5mm 12.21:1c/r pistons and eagle rods. you can also see the oil feed plugged on my P72 head...
just click the link:
http://www.rev-illusion.com/crv.htm
just click the link:
http://www.rev-illusion.com/crv.htm
05-21-2002, 06:57 PM
#6
Honda-Tech Member
Join Date: Jan 2002
Location: Sydney, Australia
Posts: 2,267
Likes: 0
Received 0 Likes
on
0 Posts
Re: some pics, B20B pistons/rods vs endyn/wiseco&eagle (T.O.tegs)
nice one!
they are the 8.8CR pistons arent they?
the new pistons look sweet!
keep it coming
t..
they are the 8.8CR pistons arent they?
the new pistons look sweet!
keep it coming
t..
05-21-2002, 07:06 PM
#7
Junior Member
Thread Starter
Join Date: Jun 2001
Location: Toronto, Ontario, Canada
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Re: some pics, B20B pistons/rods vs endyn/wiseco&eagle (tinkerbell)
I'm not sure what c/r those stock B20B pistons are however they are stampted P3F, which is the same stamp that I've seen on every B20B that we've taken apart.
the B20B that I'm using came with the small I/M as well(the one that looks almost identical to the B18B intake manifold)
the B20B that I'm using came with the small I/M as well(the one that looks almost identical to the B18B intake manifold)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
