01-0720

iv seen sites that tell you how to swap motors and such
iv been toying with the idea of a k20
iv doen a little research, and found out some information, but not alot
im looking for a site that covers what all you need to get to do the swap
what you need to modify the car to get it ready for the swap
what you need to do the swap

basicly directions and part list for the swap into a DC2

thank you for any and all information

Hondog

Go have a look at http://www.K20a.org there are a few people that can help out on there..
Also Hybrid racing has some good info on doing the swaps...

Nikos

Anything I can do to help, let me know.

01-0720

pm'ed

0hybrid racing

Also check out http://www.hybrid-racing.com and let me know if you have any questions. Good luck with your swap.

01-0720

hybrid -racing iv seens ads saying that you guys sell packages starting at 800, what all is in that paskage? mounts and wiring harness


about how much am i looking at for this swap?

any cutting or welding?

or rewiring involved, i dont mind pulling the old harness and putting in a new one, just dont want to have to custom wire stuff

thanks for the help

C M S

There is a ton of wiring

0hybrid racing

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 01-0720 &raquo;</TD></TR><TR><TD CLASS="quote">hybrid -racing iv seens ads saying that you guys sell packages starting at 800, what all is in that paskage? mounts and wiring harness


about how much am i looking at for this swap?

any cutting or welding?

or rewiring involved, i dont mind pulling the old harness and putting in a new one, just dont want to have to custom wire stuff

thanks for the help</TD></TR></TABLE>

The $800.00 includes both the harness and the mounts. This is a savings of $150.00.

There is some cutting involved. All this information is contained in the instructions.

With the hybrid racing harness you will only need to run 6 wires and these are very simple.

Let me know if you have any other questions.

Thanks,

Will

DELSLOWEST

what about for a 89 crx with k motor some wiring info and what ecu do you use for the k motor

chris_m

hondata is the only way to make power

Ekizzle

<FONT SIZE="10">K20<FONT COLOR="red">A</FONT>.org</FONT>