dohcem1

Hello guys, I'm doing a swap into my civic its an h22 into em1. I was wondering if I can use the p13 ecu with with the 97-01 prelude injectors. Those are saturated 280cc injectors. The p13 that I have is from t he obd1 92-96 prelude which originally was for peak hold injectors which need resistor box. . Do i need a resistor box or no? Any mod that I have to do or do i just plug and play. thanks

dohcem1

bump? please advise if you know. thanks alot

LA_HONDAS

no you dont need it

DSRxCandyh2bEG

iTrader: (4)

you should be able to run the saturated injectors just fine. People use p28 ecu's with peak and hold injectors so the concept is forward and reverse compatible....

Rob_O

You will not need the resistor box, but the fuel curve will not be correct. Your ECU was tuned for bigger injectors

dohcem1

thanks soo much for the reply!