PR3 ECU w/ LS block, need 12.5% more fuel?
11-30-2002, 09:37 PM
#1
Guest
Posts: n/a
PR3 ECU w/ LS block, need 12.5% more fuel?
Since the PR3 ECU was intended for use with a 1.6L engine and I'm running an LS/Vtec with 1.8L total displacement, does that mean I need to bump up the fueling by 12.5% to account for the displacement ratio 1.8/1.6 = 1.125 so I don't run lean at WOT?
Thread
Thread Starter
Forum
Replies
Last Post
