PR3-3 Head + B18C5 Bottom ECU Question PLEASE HELP!!!
#1
PR3-3 Head + B18C5 Bottom ECU Question PLEASE HELP!!!
Hey HT, I have a question regarding this build. I live in California, and would like to eventually try and get this thing bar'd. I know for the most part, it has to be vehicle, truck, etc to each of its own respectively, same year as vehicle or newer, and must have all emissions equipment installed. My question is, can I use a stock OBD1 P30 ecu? If not, what stock ecu can I use being that I need it to pass visual inspection? Motor currently has a p28 chipped with a chrome ITR basemap.
I've been searching for awhile and couldn't really find any information. Thanks again in advance.
Car
1994 Civic Si Hatchback
Motor
- 1999 B16 PR3-3 Head, ported to ITR specs
- 2000 B18C5 Bottom
- CTR std bore pistons.
- Blox Dual springs, ITR retainers, GSR cams
- OBD1 GSR transmission
I've been searching for awhile and couldn't really find any information. Thanks again in advance.
Car
1994 Civic Si Hatchback
Motor
- 1999 B16 PR3-3 Head, ported to ITR specs
- 2000 B18C5 Bottom
- CTR std bore pistons.
- Blox Dual springs, ITR retainers, GSR cams
- OBD1 GSR transmission
Last edited by kmankd; 10-11-2012 at 03:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
96_GsR_BlownEngine
Acura Integra
7
07-27-2004 12:27 AM