PICS OF MY HATCH SWAP
#1
Thread Starter
Join Date: Nov 2003
Location: Ft. Lauderdale, FL/ Passaic, NJ
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
PICS OF MY HATCH SWAP
Here are pics of my hatch. Mainly motor pics. Tell me what u think.
Engine Mods:
b18c1
skunk2 im
s2s2 cams
jun cam gears
ferrea springs
crower retainers
high comp valves (raise comp by .2 to .3)
cp pistons 11.8:1 (final comp around 12.0:1 to 12.1:1 with valves)
eagle rods
b&m fpr
walbro 255lph intank
vafc
310cc injectors
Here is a pic of my last motor on the dyno.
Modified by FastAssEG at 11:41 PM 2/2/2004
Engine Mods:
b18c1
skunk2 im
s2s2 cams
jun cam gears
ferrea springs
crower retainers
high comp valves (raise comp by .2 to .3)
cp pistons 11.8:1 (final comp around 12.0:1 to 12.1:1 with valves)
eagle rods
b&m fpr
walbro 255lph intank
vafc
310cc injectors
Here is a pic of my last motor on the dyno.
Modified by FastAssEG at 11:41 PM 2/2/2004
#3
Thread Starter
Join Date: Nov 2003
Location: Ft. Lauderdale, FL/ Passaic, NJ
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (ravens31)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ravens31 »</TD></TR><TR><TD CLASS="quote">nice.. what kind of numbers are u putting up?</TD></TR></TABLE>
I never dyno'd it yet. I just put it in. Motor only has 70 miles on fresh rebuild. Just breaking it in.
I never dyno'd it yet. I just put it in. Motor only has 70 miles on fresh rebuild. Just breaking it in.
#4
Honda-Tech Member
Join Date: Feb 2002
Location: Angeles Crest, so cal
Posts: 13,501
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (FastAssEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastAssEG »</TD></TR><TR><TD CLASS="quote">
I never dyno'd it yet. I just put it in. Motor only has 70 miles on fresh rebuild. Just breaking it in.
</TD></TR></TABLE>
Is that a good way to break it in? Seems like one to me....
I never dyno'd it yet. I just put it in. Motor only has 70 miles on fresh rebuild. Just breaking it in.
</TD></TR></TABLE>
Is that a good way to break it in? Seems like one to me....
#5
Thread Starter
Join Date: Nov 2003
Location: Ft. Lauderdale, FL/ Passaic, NJ
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (chyknees)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chyknees »</TD></TR><TR><TD CLASS="quote">
Is that a good way to break it in? Seems like one to me.... </TD></TR></TABLE>
What's your point. You gonna pay for me to get it broken in on the dyno?
Is that a good way to break it in? Seems like one to me.... </TD></TR></TABLE>
What's your point. You gonna pay for me to get it broken in on the dyno?
Trending Topics
#8
Thread Starter
Join Date: Nov 2003
Location: Ft. Lauderdale, FL/ Passaic, NJ
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (Jason kiDD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jason kiDD »</TD></TR><TR><TD CLASS="quote">What kind of exhaust is that?!</TD></TR></TABLE>
HKS Hyper pan.
HKS Hyper pan.
#13
Thread Starter
Join Date: Nov 2003
Location: Ft. Lauderdale, FL/ Passaic, NJ
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (Manuel)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Manuel »</TD></TR><TR><TD CLASS="quote">Nice AllMotor Build
is it a Stock Bore 81mm? or 84mm?
Does it have any Head Work?
that Motor will be good for 210Whp</TD></TR></TABLE>
Yes. Unfortuneatly stock bore and no head work. I hope to be near 200whp as is.
is it a Stock Bore 81mm? or 84mm?
Does it have any Head Work?
that Motor will be good for 210Whp</TD></TR></TABLE>
Yes. Unfortuneatly stock bore and no head work. I hope to be near 200whp as is.
#14
Thread Starter
Join Date: Nov 2003
Location: Ft. Lauderdale, FL/ Passaic, NJ
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (smokey2.0)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smokey2.0 »</TD></TR><TR><TD CLASS="quote">nice set up, how many miles to go?</TD></TR></TABLE>
I am hardly driving it due to license issues. I only have about 90 miles on it. Also, due to for some reson my plugs keep on fouling on me and I'm on my 4th set with only 90 miles on it. I have no clue what's wrong.
I am hardly driving it due to license issues. I only have about 90 miles on it. Also, due to for some reson my plugs keep on fouling on me and I'm on my 4th set with only 90 miles on it. I have no clue what's wrong.
#20
Honda-Tech Member
Join Date: May 2000
Location: Bada BING, NJ, USA
Posts: 2,137
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (FastAssEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastAssEG »</TD></TR><TR><TD CLASS="quote">
I am hardly driving it due to license issues. I only have about 90 miles on it. Also, due to for some reson my plugs keep on fouling on me and I'm on my 4th set with only 90 miles on it. I have no clue what's wrong.</TD></TR></TABLE>
What are you controlling the fuel with? VAFC? 310's will foul your plugs if you dont lean them out a little at idle and part throttle.
EVIL
I am hardly driving it due to license issues. I only have about 90 miles on it. Also, due to for some reson my plugs keep on fouling on me and I'm on my 4th set with only 90 miles on it. I have no clue what's wrong.</TD></TR></TABLE>
What are you controlling the fuel with? VAFC? 310's will foul your plugs if you dont lean them out a little at idle and part throttle.
EVIL
#21
Thread Starter
Join Date: Nov 2003
Location: Ft. Lauderdale, FL/ Passaic, NJ
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (Evil DOHC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Evil DOHC »</TD></TR><TR><TD CLASS="quote">
What are you controlling the fuel with? VAFC? 310's will foul your plugs if you dont lean them out a little at idle and part throttle.
EVIL </TD></TR></TABLE>
I have stock injectors in there for break in. I have 310's and a vafc, just not installed yet.
What are you controlling the fuel with? VAFC? 310's will foul your plugs if you dont lean them out a little at idle and part throttle.
EVIL </TD></TR></TABLE>
I have stock injectors in there for break in. I have 310's and a vafc, just not installed yet.
#22
Honda-Tech Member
Re: PICS OF MY HATCH SWAP (FastAssEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastAssEG »</TD></TR><TR><TD CLASS="quote">
Here is a pic of my last motor on the dyno.
</TD></TR></TABLE>
By any chance is that dyno shot at Cartek in davie?
Here is a pic of my last motor on the dyno.
</TD></TR></TABLE>
By any chance is that dyno shot at Cartek in davie?
#23
Thread Starter
Join Date: Nov 2003
Location: Ft. Lauderdale, FL/ Passaic, NJ
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (ultimatehonda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ultimatehonda »</TD></TR><TR><TD CLASS="quote">
By any chance is that dyno shot at Cartek in davie?</TD></TR></TABLE>
yup
By any chance is that dyno shot at Cartek in davie?</TD></TR></TABLE>
yup
#25
Junior Member
Join Date: Jan 2003
Location: Florida, US
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Re: PICS OF MY HATCH SWAP (FastAssEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastAssEG »</TD></TR><TR><TD CLASS="quote">
I never dyno'd it yet. I just put it in. Motor only has 70 miles on fresh rebuild. Just breaking it in.
</TD></TR></TABLE>
ill break it in for u ginuwine, jus lemme know
I never dyno'd it yet. I just put it in. Motor only has 70 miles on fresh rebuild. Just breaking it in.
</TD></TR></TABLE>
ill break it in for u ginuwine, jus lemme know