p73 rods on a p72 crank
10-10-2001, 01:47 AM
#2
Honda-Tech Member
Re: p73 rods on a p72 crank (b18vtec)
You have to match the rods with the bearing codes on the crank. Best way is to use a set of used bearings, measure them (plastigauge) then purchase new bearings according to the measurements to attained.
HTH
HTH
10-10-2001, 01:54 AM
#3
Junior Member
Thread Starter
Join Date: Feb 2001
Location: CA
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Re: p73 rods on a p72 crank (G3-TEG)
are the gsr and itr rod color bearings identical? this is my setup:
b18c1
gsr head
us itr pistons
itr rods
gsr crank
old gsr rods where 3 green and 1 brown
i got new ones from the dealer
installed everything and started the motor up and heard some really loud knocking. seemed to be more audible closer to the tranny. am i using the right rod bearings? help please...
b18c1
gsr head
us itr pistons
itr rods
gsr crank
old gsr rods where 3 green and 1 brown
i got new ones from the dealer
installed everything and started the motor up and heard some really loud knocking. seemed to be more audible closer to the tranny. am i using the right rod bearings? help please...
Thread
Thread Starter
Forum
Replies
Last Post
xparkesx
All Motor / Naturally Aspirated
18
03-08-2005 09:03 PM
