obd2b->a then obd2 ->obd1?? too many harnesses?
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: schooling kids in ny, usa
Posts: 9,813
Likes: 0
Received 9 Likes
on
9 Posts
obd2b->a then obd2 ->obd1?? too many harnesses?
ok, so ive done a lil reading and whatnot- obd2b motor(b18b) in an obd2a(97 hx) car needs a conversion harness to take care of the immobilizer situation. my question is that im eventually gonna run an obd1 ls ecu and program it for boost with uberdata, meaning id need a obd2-obd1 harness. would running 2 conversion harnesses be bad?
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: schooling kids in ny, usa
Posts: 9,813
Likes: 0
Received 9 Likes
on
9 Posts
Re: obd2b->a then obd2 ->obd1?? too many harnesses? (xEnderx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xEnderx »</TD></TR><TR><TD CLASS="quote">Why not jsut get an OBDIIb to OBD1 jumper?</TD></TR></TABLE>
hmmm i wasnt sure if they made these. im pretty new to the whole swap thing, cause i chose to turbo my old motor instead of swap it out
hmmm i wasnt sure if they made these. im pretty new to the whole swap thing, cause i chose to turbo my old motor instead of swap it out
Thread
Thread Starter
Forum
Replies
Last Post