OBD2 GSR Wiring IAB/EVAP Purge
#1
Honda-Tech Member
Thread Starter
OBD2 GSR Wiring IAB/EVAP Purge
Hey guys,
So, I've seen a lot of controversy around the wiring of the EVAP Purge solenoid for OBD2 GSR's and I wanted to know if anybody has some pictures or diagrams depicting what it should look like. I currently have a OBD2a GSR swapped into my 1997 Integra LS with a CEL for EVAP. If anyone has the pinout and/or wire color for the proper EVAP wiring, that would be helpful.
NOTE: I do not have the GSR wiring harness between the shock tower, through the firewall to the ECU. I'm still using the LS one.
Thanks,
DC4_Dad
So, I've seen a lot of controversy around the wiring of the EVAP Purge solenoid for OBD2 GSR's and I wanted to know if anybody has some pictures or diagrams depicting what it should look like. I currently have a OBD2a GSR swapped into my 1997 Integra LS with a CEL for EVAP. If anyone has the pinout and/or wire color for the proper EVAP wiring, that would be helpful.
NOTE: I do not have the GSR wiring harness between the shock tower, through the firewall to the ECU. I'm still using the LS one.
Thanks,
DC4_Dad
Thread
Thread Starter
Forum
Replies
Last Post
StreetwizeRacin2
Honda Civic / Del Sol (1992 - 2000)
2
12-19-2003 07:20 AM