LS in a CRX 1/4 TIMES??
05-17-2002, 06:22 AM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Midwest States, WI
Posts: 2,283
Likes: 0
Received 0 Likes
on
0 Posts
LS in a CRX 1/4 TIMES??
Hey There, I was wondering how fast my car would run in 1/4 mile??..my setup is..
1995 (LS) B18B1 Motor In a 1991 Honda CRX HF
Head is Ported & Polish, 403 (Stage 2 ) Crower Cams, AEM Cam Gears, 3 Angle Valve Job, Bored-Out Throttle Body, Titanium Retainers, Dual Valvesprings, Port-Match Intake Manifold, DC 4-2-1 Ceremic Header, Hi-Flo Cat, Intake, Polish Combustion Camber, Re-Program LS ECU to 8,500 Redline, and Custom Catback Exhaust with 2.25 Piping.
BTW..DYNO--->>175 @ the Flywheel, and 156 @ the Wheels..
I have never ran with this setup yet..but I did run it when I only had a B18B (LS), with I/H/E in my REX..and best time was 14.4..
[Modified by skellator_thoj, 3:23 PM 5/17/2002]
1995 (LS) B18B1 Motor In a 1991 Honda CRX HF
Head is Ported & Polish, 403 (Stage 2 ) Crower Cams, AEM Cam Gears, 3 Angle Valve Job, Bored-Out Throttle Body, Titanium Retainers, Dual Valvesprings, Port-Match Intake Manifold, DC 4-2-1 Ceremic Header, Hi-Flo Cat, Intake, Polish Combustion Camber, Re-Program LS ECU to 8,500 Redline, and Custom Catback Exhaust with 2.25 Piping.
BTW..DYNO--->>175 @ the Flywheel, and 156 @ the Wheels..
I have never ran with this setup yet..but I did run it when I only had a B18B (LS), with I/H/E in my REX..and best time was 14.4..
[Modified by skellator_thoj, 3:23 PM 5/17/2002]
05-17-2002, 09:20 AM
#3
Join Date: Feb 2002
Location: Indianapolis, IN, USA
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Re: LS in a CRX 1/4 TIMES?? (Devin17)
I would think a 14.4 in a crx is about right. I have seen many crx's with gsr motors or b16's running 13's with just the motor or i/h/e
05-17-2002, 09:54 AM
#5
Join Date: May 2002
Location: St. Cloud, MN
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Re: LS in a CRX 1/4 TIMES?? (skellator_thoj)
hey...
my bro in law from miltown had a ls in a hatch, which is a tad heavier than a crx... he had i/h/e and port/polish shaved head... his best was a 14.3... im sure u would hit high 13's to low 14's... This is Team C-Seng if u ask... We gonna test a the track this friday... showup and we can talk...
my bro in law from miltown had a ls in a hatch, which is a tad heavier than a crx... he had i/h/e and port/polish shaved head... his best was a 14.3... im sure u would hit high 13's to low 14's... This is Team C-Seng if u ask... We gonna test a the track this friday... showup and we can talk...
Trending Topics
05-17-2002, 01:20 PM
#8
Join Date: Oct 2001
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Re: LS in a CRX 1/4 TIMES?? (skellator_thoj)
I used to want a b16 crx so bad intill I raced about 4 of them all with H/i/E against my 96 gsr with h/i/e and I have yet to have one beat my in a roll on or off the line. I haven't been impressed yet.
Thread
Thread Starter
Forum
Replies
Last Post
TEXREX88
All Motor / Naturally Aspirated
5
01-29-2007 10:32 AM
