Just got my JDM GSR Swap in on my civic 4dr. Pictures soon to come.
05-26-2004, 09:54 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Lexington, KY, US
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
Just got my JDM GSR Swap in on my civic 4dr. Pictures soon to come.
Well i've been driving my car with my new engine. I have a JDM GSR in a 98 civic 4dr. Here are the specs:
JDM GSR Engine (from Hmotorsonline)
ACT S/S Clutch
ACT 12lb flywheel
Hasport Mount
AEM short ramintake
HKS hiper exhaust system
From This:
http://www.imagestation.com/pi...g.jpg
To This:
http://www.imagestation.com/pi...g.jpg
http://www.imagestation.com/pi...g.jpg
Exterior Pic:
http://www.imagestation.com/pi...g.jpg
It is a huge difference in power over my stock d16y8 with IHE. Iam still breaking in the clutch but i've taken it up to vtec a few times (no burnouts though or hard launchs). It really pulls hard in 2nd to 3rd. I can't wait to take it to the strip and test drive it. My only complaint is that the engine vibrates alot.
I can't wait untill I can get a turbo kit next summer. Right now i really need some new tires to hold up to all the new power.
I also learned that with JDM axles you lose your ABS. I need to get some USDM ITR or GSR axles inorder to recover my ABS
Hey also look at my sig if you need any D series parts. I need to pay off this swap. My prices are also negotiable.
Modified by ramz7887 at 7:56 PM 5/31/2004
JDM GSR Engine (from Hmotorsonline)
ACT S/S Clutch
ACT 12lb flywheel
Hasport Mount
AEM short ramintake
HKS hiper exhaust system
From This:
http://www.imagestation.com/pi...g.jpg
To This:
http://www.imagestation.com/pi...g.jpg
http://www.imagestation.com/pi...g.jpg
Exterior Pic:
http://www.imagestation.com/pi...g.jpg
It is a huge difference in power over my stock d16y8 with IHE. Iam still breaking in the clutch but i've taken it up to vtec a few times (no burnouts though or hard launchs). It really pulls hard in 2nd to 3rd. I can't wait to take it to the strip and test drive it. My only complaint is that the engine vibrates alot.
I can't wait untill I can get a turbo kit next summer. Right now i really need some new tires to hold up to all the new power.
I also learned that with JDM axles you lose your ABS. I need to get some USDM ITR or GSR axles inorder to recover my ABS
Hey also look at my sig if you need any D series parts. I need to pay off this swap. My prices are also negotiable.
Modified by ramz7887 at 7:56 PM 5/31/2004
05-31-2004, 05:30 PM
#4
Join Date: Jan 2004
Location: Asheville, NC
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my JDM GSR Swap in on my civic 4dr. Pictures soon to come. (Skip01)
Nice swap...and yeah SLEEP on someone. But Man don't those Hasport mounts make your teeth hurt at the Drive-in? LOL
06-01-2004, 12:38 AM
#7
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Lexington, KY, US
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my JDM GSR Swap in on my civic 4dr. Pictures soon to come. (sleeperciv)
yeah i plan on the sleeper look. my next goal are some rims i would like 16's to go with a big brake kit. But i don't want to lose my stock loook. I want to turbo the car next summer. Iam gonna hook up the ac later on once i find a del sol a/c bracket
Trending Topics
07-30-2004, 12:18 PM
#9
Honda-Tech Member
Thread Starter
Join Date: Mar 2003
Location: Lexington, KY, US
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my JDM GSR Swap in on my civic 4dr. Pictures soon to come. (ramz7887)
Heres a update:
I just put on some si rims. I'm doing a rear disk conversion with , Tein flex kit, skunk2 camber, revo camber, axiss brake pads, and brembo rotots.
I just put on some si rims. I'm doing a rear disk conversion with , Tein flex kit, skunk2 camber, revo camber, axiss brake pads, and brembo rotots.
Thread
Thread Starter
Forum
Replies
Last Post
staticlude17
Mid-Atlantic (Sales)
2
10-23-2010 01:51 PM
