JDM K20A-R or USDM K20A into a 99 EK9
#1
Thread Starter
Join Date: Jan 2005
Location: Coquitlam, BC, Canada
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
JDM K20A-R or USDM K20A into a 99 EK9
Hello, this is my first post, and honda-tech warned me about some limiting thing that if i do something bad i wont get my account or somthing so im afraid that ill do something wrong...i apologize.
Sorry if someone already had asked this question before I couldnt find it.
Im wondering if anyone on this forum had done the swap of "JDM K20A-R or USDM K20A into a 99 EK9".
I would like some pointers on what I would need or what problems I might encounter. Guide me through this process and I would like to learn a lot from it as well.
Thanks.
Sorry if someone already had asked this question before I couldnt find it.
Im wondering if anyone on this forum had done the swap of "JDM K20A-R or USDM K20A into a 99 EK9".
I would like some pointers on what I would need or what problems I might encounter. Guide me through this process and I would like to learn a lot from it as well.
Thanks.
#2
Re: JDM K20A-R or USDM K20A into a 99 EK9 (kspec)
Welcome to H-T. A lot of topics and questions that people ask about have been covered a lot. The bets thing to do is use the search feature and do a little research on your own before you post. The K series stuff has been covered a good bit lately so check around I'm sure you'll dig up something.
Thread
Thread Starter
Forum
Replies
Last Post
01-0041
Appearance Build Threads
382
01-20-2020 10:26 AM