JDM ITR Swap into 95 Teggy LS
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Central Jersey
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
JDM ITR Swap into 95 Teggy LS
Ok heres the scoop.... Today I got ahold of a 1995 Teggy LS with full JDM ITR swap in it. Knowing swap itself is worth 4k I got it for a cool $3000, couldn't refuse it. Well I am a OBD 1 EG guy and typically I could just use the EX harness and OBD 1 dizzy but this guy somehow ran the harness through the Left side of the engine bay and it runs but when I drove it, it seemed restricted and underpowered. He only had swap for a few months due to a deployment. So my question is what engine harness should I use and if there is one that is plug and play since I have P73-003 ECU and a OBD2a engine....and a obd1-obd2a jumper harness but its not installed...pics or links would be great thanks ahead of time......ps checked forums and didnt find one for ITR to teggy...
#7
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Central Jersey
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM ITR Swap into 95 Teggy LS
Well I guess no one knows how to swap a ITR into an LS so I figured out the issue and it is use the LS engine harness p73-003 ecu and buy a $55 harness from rywire.com.
Thread
Thread Starter
Forum
Replies
Last Post
infulleffect
Hybrid / Engine Swaps
1
01-31-2006 06:56 PM