IAT and IAC Wire colors (SEARCHED) Getting CEL's GSR SWAP OBD1
11-28-2005, 05:53 PM
#1
* B A N N E D *
Thread Starter
Join Date: May 2002
Location: pa, usa
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
IAT and IAC Wire colors (SEARCHED) Getting CEL's GSR SWAP OBD1
Running a virgin p28 in my 95 cx hatch with gsr swap with lots of mods . Previously had hondata on it and ran perfect no cel's . Now i swapped edelbrock manifold on and maybe got a few of those dumb 2 pin plugs that are all the same looking maybe on the wrong sensors because im getting a code 10 IAT - intake air temperature sensor . I thought maybe i had the iac and iat backwards so i tried switching them and then the car revved to like 2-k and still cel. Im pretty sure its a obd1 gsr harness and i need to know what colors the wires are so i can get them on the right sensors. Any other advice would be awesome at this point
Thread
Thread Starter
Forum
Replies
Last Post
vi3tromanc3r
Honda Civic / Del Sol (1992 - 2000)
6
04-12-2008 10:42 PM
crxsiperf
Honda Civic / Del Sol (1992 - 2000)
1
11-28-2005 07:50 PM
