Henry HA

Well, ive done alot of research on engine swaps and ive searched around honda tech alot and cant really find what i need, people just keep giving me the link to c speed and that doesnt tell me enough

i only know the few basics of swaps like trans, axle, mouts, harnesses( odb or odbII), shift linkage, and most importantly the engine.

i was wondering if anyone on this forum would write out a step by step starting from drainin oils and fluids to the right tools to what to work with.

i would also like to know what to expect time wise, space, any problems with first swaps that i should look for

this write up would help alot to my friends and i and some future honda tech members. thanks

ps : Pictures would help also...

VTECVillain

They sent you the link to C-Speed for a reason. They have a damn good write up that illustrates a B18C into an EG. It's a good article and I don't see how it wouldn't help you out in some way. I doubt anyone is going to have this extremely elaborate down to every single detail How-To swap guide for you to follow. The best way to learn is hands on.

inspyral

Agreed. The C-Speed write up is pretty detailed. If you need specifics like torque specs, etc, pick up a Helm's manual or post specific questions here.