Help! Took dizzy off and can't put it back on because...
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Dirty South, USA
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
Help! Took dizzy off and can't put it back on because...
I forgot to look at which way the rotor was pointing when i took it off. I was still only on a half cup of coffee when i took it off so hammerhead on me
Obviously, it can only go on 2 ways, one being right and one being wrong. How can I tell which way to have the rotor face when i re-install it? This is on my jdm h22a, I took the dizzy off because i am not getting spark and I need to possibly replace cap/rotor/ignitor/coil.
Obviously, it can only go on 2 ways, one being right and one being wrong. How can I tell which way to have the rotor face when i re-install it? This is on my jdm h22a, I took the dizzy off because i am not getting spark and I need to possibly replace cap/rotor/ignitor/coil.
#2
Honda-Tech Member
Join Date: Mar 2001
Location: whiteford, MD
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help! Took dizzy off and can't put it back on because... (SearchBeforeUPost!)
on most hondas, the distributor can only go on one way. set you car to top dead center. then rotate the rotor so its pointing to the No.1 cyl. Then slide the dist. on it give it a go.
Thread
Thread Starter
Forum
Replies
Last Post
SearchBeforeUPost!
Tech / Misc
4
09-24-2003 01:01 PM
SearchBeforeUPost!
Honda Accord (1990 - 2002)
2
09-23-2003 06:14 AM
SearchBeforeUPost!
Honda Prelude
8
09-21-2003 10:17 AM