HCP billet H22-EG driver side motor mount
08-10-2003, 12:27 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Seattle, WA
Posts: 2,505
Likes: 0
Received 0 Likes
on
0 Posts
HCP billet H22-EG driver side motor mount
I saw that HCP now offers a billet driver side motor mount for the H22's going into the EG/DC chassis. I was wondering if any of you guys are using the billet one and how is it holding up. Do you feel any vibration? Cause it looks like its a little bit thicker than the regular HCP one. What im saying is that i know that if the motor mount touches the chassis then you will get some vibration, so im just wondering if the billet motor mount fits in correctly with no problems. Im about to order my mounts on monday so i would like to know which set to get. TIA!! 
08-10-2003, 11:22 PM
#3
Junior Member
Join Date: Oct 2002
Location: Batavia, IL, USA
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
i have the new set with the billet drivers and its very nice looking... have not installed the H yet tho so I cant say much about fitment... however if it didnt fit then i doubt they would have changed their kit that already worked for one that wouldnt.
08-11-2003, 03:02 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Seattle, WA
Posts: 2,505
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mister2racer)
True, but the mount looks noticably ticker.... just a concern. I just ordered the mounts today.. we'll see how it fits in when I get them. Ill keep you posted and take pics with just that mount on to let you know how it fits... (no motor in my car right now) 
08-11-2003, 03:55 PM
#6
Re: (ozzyman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ozzyman »</TD></TR><TR><TD CLASS="quote">True, but the mount looks noticably ticker.... just a concern. I just ordered the mounts today.. we'll see how it fits in when I get them. Ill keep you posted and take pics with just that mount on to let you know how it fits... (no motor in my car right now) </TD></TR></TABLE>
It's thicker because it's billet aluminum. If it was as thin as steel, then it would break but with the thicker aluminum mount, one guy here dyno tested his car with 458 whp (turbo H22 setup in an EG hatch) and had no problems. I wanted to take a picture of his setup but he was kind of reluctant to let me do so
.
</TD></TR></TABLE>It's thicker because it's billet aluminum. If it was as thin as steel, then it would break but with the thicker aluminum mount, one guy here dyno tested his car with 458 whp (turbo H22 setup in an EG hatch) and had no problems. I wanted to take a picture of his setup but he was kind of reluctant to let me do so
.
08-11-2003, 04:53 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Seattle, WA
Posts: 2,505
Likes: 0
Received 0 Likes
on
0 Posts
Re: (vinnymack)
Ordered the mounts from JDMshit.com from Newman, got them for a monthly special of $275 shipped w/ the billet driver side mount.
Thread
Thread Starter
Forum
Replies
Last Post
Tw1n Turb0 Z
Honda Civic / Del Sol (1992 - 2000)
12
06-19-2004 09:39 AM
