H23A-EG shifter problem...
#1
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Batavia, IL, United States
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
H23A-EG shifter problem...
I have a 1992 Civic CX with a JDM H23A swapped into it. My friend did the swap for me, and he has the same engine in the same car (so it's not the way the cables are routed).
My shifter is inaccurate and VERY notchy. Also, it won't center itself (if it's in neutral and I push it to the left, it will stay where ever it is instead of bouncing back to the center). Having this problem also makes me scared to downshift or REALLY get on it because of the inaccuracy. Does anyone have any ideas?
My shifter is inaccurate and VERY notchy. Also, it won't center itself (if it's in neutral and I push it to the left, it will stay where ever it is instead of bouncing back to the center). Having this problem also makes me scared to downshift or REALLY get on it because of the inaccuracy. Does anyone have any ideas?
#3
Re: (v4lu3s)
i agree, check to make sure the cables arent kinked, i replaced mine at the same time i put in a forbidden motorsports shifter, best upgrade besides motor. thanks jeremy
Thread
Thread Starter
Forum
Replies
Last Post