H22ek Wiring problems mid-swap
#1
Junior Member
Thread Starter
Join Date: Jun 2003
Location: Baltimore, MD, USA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
H22ek Wiring problems mid-swap
Iam on my 3rd day now swaping this bitch in 98 CX and im now lost on the wiring
IF anyone can help me out like Wire to Wire intructions or any sites that have it .. or where the hell do i wire the wires i had to add to my ecu.. enough **** went wrong iam just trying to drive my car a gain
IF anyone can help me out like Wire to Wire intructions or any sites that have it .. or where the hell do i wire the wires i had to add to my ecu.. enough **** went wrong iam just trying to drive my car a gain
#2
Re: H22ek Wiring problems mid-swap (st0nedstoopid)
call up Place Racing, they can help you or make one for you.
Im having them make me a OBD0 to OBD1 H22 harness for my 90 Civic Si.
--good guys
Im having them make me a OBD0 to OBD1 H22 harness for my 90 Civic Si.
--good guys
#5
Honda-Tech Member
Re: H22ek Wiring problems mid-swap (st0nedstoopid)
a little more info, What ECU and what year? what wiring you telling about? Vtec? knock? Is it JDM motor? You going to run OBD 1 or OBD 2?
#7
Junior Member
Thread Starter
Join Date: Jun 2003
Location: Baltimore, MD, USA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22ek Wiring problems mid-swap (junglerunna02)
95 JDM h22 motor...Using stock CX harness from 98 civic.. Have odb1 to Odb2 harness with p13 ecu.. ijust took out my stock harness and hopfully beable to wirre everything up .. and i have knock sensor
Thread
Thread Starter
Forum
Replies
Last Post