H22 into 1999 Civic 1.8VTi
02-08-2008, 08:01 AM
#1
Thread Starter
Join Date: Jan 2004
Location: Glasgow, Scotland, UK
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
H22 into 1999 Civic 1.8VTi
Hi, don't 'hate' i have searched but there's a sheer overload of information.
Here's what i've got:
1999 Civic 1.8Vti Aerodeck (B18C4 engine with S9B box).. not sure but i reckon the engine bay could be the same as an MB6 also.
I'm looking to transplant an H22 in from a JDM Prelude. I can get everything from the prelude, engine, box, mounts, driveshafts, hubs, loom etc.. just need an ECU (p13 i think?)
Can anyone give me a brief and short list on what i would need, or can use.. i.e. can i use the B18 or H22 mounts?, what driveshafts? well that's basically it, mounts and driveshafts really.. i think the Prelude track is wider so i doubt i can use those shafts.. dunno, thought i'd ask the experts.
Here's what i've got:
1999 Civic 1.8Vti Aerodeck (B18C4 engine with S9B box).. not sure but i reckon the engine bay could be the same as an MB6 also.
I'm looking to transplant an H22 in from a JDM Prelude. I can get everything from the prelude, engine, box, mounts, driveshafts, hubs, loom etc.. just need an ECU (p13 i think?)
Can anyone give me a brief and short list on what i would need, or can use.. i.e. can i use the B18 or H22 mounts?, what driveshafts? well that's basically it, mounts and driveshafts really.. i think the Prelude track is wider so i doubt i can use those shafts.. dunno, thought i'd ask the experts.
Thread
Thread Starter
Forum
Replies
Last Post
