H22 H2B EG Civic Project has started. (56k, go swap a motor)
#29
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RotiEatter)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter »</TD></TR><TR><TD CLASS="quote">Do you want to convert to a manual belt tensior? If so, I've got all the parts needed. We can work something out.
</TD></TR></TABLE>
yeah he does need it. Hook it up Kabir
</TD></TR></TABLE>
yeah he does need it. Hook it up Kabir
#30
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: AKA Sleepingeg6 BaY aReA, Ca, US
Posts: 3,184
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RotiEatter)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter »</TD></TR><TR><TD CLASS="quote">Do you want to convert to a manual belt tensior? If so, I've got all the parts needed. We can work something out.
</TD></TR></TABLE>
Pm me a price
</TD></TR></TABLE>
Pm me a price
#31
I'm really 2slow
Re: (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter »</TD></TR><TR><TD CLASS="quote">Do you want to convert to a manual belt tensior? If so, I've got all the parts needed. We can work something out.
</TD></TR></TABLE>how much do these parts run for?
</TD></TR></TABLE>how much do these parts run for?
#32
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2FAST4U831)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2FAST4U831 »</TD></TR><TR><TD CLASS="quote">how much do these parts run for? </TD></TR></TABLE>
$140
$140
#34
Junior Member
Join Date: Oct 2004
Location: Eleele, HI, usa
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RotiEatter)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter »</TD></TR><TR><TD CLASS="quote">I've got everything...
Timing belt with very little use
OEM Water pump with very little use
and of course all the conversion pieces...</TD></TR></TABLE>
IF he doesn't buy it, i'll buy all your manual coversion parts
Timing belt with very little use
OEM Water pump with very little use
and of course all the conversion pieces...</TD></TR></TABLE>
IF he doesn't buy it, i'll buy all your manual coversion parts
#36
Junior Member
Join Date: Oct 2004
Location: Eleele, HI, usa
Posts: 702
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RotiEatter)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter »</TD></TR><TR><TD CLASS="quote">Or you guys can just both make me offers... I'm not really sure what to ask for all of it to be honest. </TD></TR></TABLE>
he asked first so i'll just wait and see...
he asked first so i'll just wait and see...
#38
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: AKA Sleepingeg6 BaY aReA, Ca, US
Posts: 3,184
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Laguna7)
more parts
Anyone know if these are the right alignment dowels?
I have no idea what to do with them, they supposed to slide in or no? i got them for a prelude, not shure if its the right ones.
Anyone know if these are the right alignment dowels?
I have no idea what to do with them, they supposed to slide in or no? i got them for a prelude, not shure if its the right ones.
#40
Ditto
iTrader: (1)
Re: (loud3nergy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by loud3nergy »</TD></TR><TR><TD CLASS="quote">I got $$ for you, chekc yo PM's let me fund this project </TD></TR></TABLE>
I'm accepting donations for my swap as well. PM me too if you want to send me money, haha.
I'm accepting donations for my swap as well. PM me too if you want to send me money, haha.
#41
Honda-Tech Member
Join Date: Apr 2005
Location: Glasgow, KY, USA
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RotiEatter)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter »</TD></TR><TR><TD CLASS="quote">I'm accepting donations for my swap as well. PM me too if you want to send me money, haha. </TD></TR></TABLE>haha, not unless your selling something I want!
Steve-o keep refreshing those IM's man, mine dont pop-up either..
Steve-o keep refreshing those IM's man, mine dont pop-up either..
#42
Honda-Tech Member
Join Date: Apr 2006
Location: Central, Indiana
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Re: (loud3nergy)
be careful there on that water pump when I took mine off today a bolt broke in it some how.....but impact owned it!
btw the green sensor that your holding goes to the vtec solenoid i just took mine off two days ago i'm positve...but i'll double check in the morning for you.....btw what clutch are you using? i Just got a Fidanza flywheel too
btw the green sensor that your holding goes to the vtec solenoid i just took mine off two days ago i'm positve...but i'll double check in the morning for you.....btw what clutch are you using? i Just got a Fidanza flywheel too
#43
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: AKA Sleepingeg6 BaY aReA, Ca, US
Posts: 3,184
Likes: 0
Received 0 Likes
on
0 Posts
Re: (H22Ej2)
im gonna be rocking a exedy full face cause the cars gonna be daily drivin plus i currently got it in my car and i never had an issue with it. it aint fot the vtec im positive cause i had the vtec ones plugged, this ones behind the engine, under the intake manifold
#44
Re: H22 H2B EG Civic Project has started. (STEV3-O)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STEV3-O »</TD></TR><TR><TD CLASS="quote">ya i got a fidanza, but its got a scratch on the surface area doesnt return my emails, might call him and tell his *** off.</TD></TR></TABLE>
Get a flywheel here: http://www.prostreetonline.com...heels/
I got one for my GSR swap. Don't trust egay.
Get a flywheel here: http://www.prostreetonline.com...heels/
I got one for my GSR swap. Don't trust egay.
#45
Ditto
iTrader: (1)
Re: (STEV3-O)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STEV3-O »</TD></TR><TR><TD CLASS="quote">im gonna be rocking a exedy full face cause the cars gonna be daily drivin plus i currently got it in my car and i never had an issue with it. it aint fot the vtec im positive cause i had the vtec ones plugged, this ones behind the engine, under the intake manifold</TD></TR></TABLE>
I meant to comment on that plug before, but it slipped my mind... I have that same plug hanging out. I have no idea what it goes for, but I wouldn't worry about it. It has to be something either a/c, abs, p/s, or something along those lines, hah. I have none of those.
Every time I did an oil change I would check around under the car to make sure I wasn't making a mistake. I was always paranoid about it, but I'm 99.999% sure its harmless.
I meant to comment on that plug before, but it slipped my mind... I have that same plug hanging out. I have no idea what it goes for, but I wouldn't worry about it. It has to be something either a/c, abs, p/s, or something along those lines, hah. I have none of those.
Every time I did an oil change I would check around under the car to make sure I wasn't making a mistake. I was always paranoid about it, but I'm 99.999% sure its harmless.
#46
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RotiEatter)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter »</TD></TR><TR><TD CLASS="quote">
I meant to comment on that plug before, but it slipped my mind... I have that same plug hanging out. I have no idea what it goes for, but I wouldn't worry about it. It has to be something either a/c, abs, p/s, or something along those lines, hah. I have none of those.
Every time I did an oil change I would check around under the car to make sure I wasn't making a mistake. I was always paranoid about it, but I'm 99.999% sure its harmless. </TD></TR></TABLE>
it's a PS plug
I meant to comment on that plug before, but it slipped my mind... I have that same plug hanging out. I have no idea what it goes for, but I wouldn't worry about it. It has to be something either a/c, abs, p/s, or something along those lines, hah. I have none of those.
Every time I did an oil change I would check around under the car to make sure I wasn't making a mistake. I was always paranoid about it, but I'm 99.999% sure its harmless. </TD></TR></TABLE>
it's a PS plug
#48
Honda-Tech Member
Join Date: May 2004
Location: Great Bend, Kansas, U.S.A
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
IM really interested to see how this project comes out... how many days a week are you working on it? Just taking your time? im trying to see..since I will not have a secondary mode of transportation...if changing my eg hatch from a b16a to a h22 w/ h2b is feasible in a weekend.
If I already have a b16a lsd tranny..do I need a new flywheel? My flywheel and clutch both look pretty good.
If I already have a b16a lsd tranny..do I need a new flywheel? My flywheel and clutch both look pretty good.
#49
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (PhoebeusFenix)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PhoebeusFenix »</TD></TR><TR><TD CLASS="quote">IM really interested to see how this project comes out... how many days a week are you working on it? Just taking your time? im trying to see..since I will not have a secondary mode of transportation...if changing my eg hatch from a b16a to a h22 w/ h2b is feasible in a weekend.
If I already have a b16a lsd tranny..do I need a new flywheel? My flywheel and clutch both look pretty good.</TD></TR></TABLE>
you should use an aluminum flywheel. It would be tough to complete a H2B project in one weekend. It's possible, but not likely.
If I already have a b16a lsd tranny..do I need a new flywheel? My flywheel and clutch both look pretty good.</TD></TR></TABLE>
you should use an aluminum flywheel. It would be tough to complete a H2B project in one weekend. It's possible, but not likely.
#50
I'm really 2slow
Re: (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">
you should use an aluminum flywheel. It would be tough to complete a H2B project in one weekend. It's possible, but not likely.</TD></TR></TABLE>I'm planning on doing my H2B in 1 day
you should use an aluminum flywheel. It would be tough to complete a H2B project in one weekend. It's possible, but not likely.</TD></TR></TABLE>I'm planning on doing my H2B in 1 day