H22 EG's 1/4 ET
#1
Thread Starter
Join Date: Apr 2002
Location: Dynotuner.net, 2JZGTE
Posts: 2,884
Likes: 0
Received 0 Likes
on
0 Posts
H22 EG's 1/4 ET
Silver Dollar Raceway....Import Showdown Event 10/10/2004
New times ALL MOTOR:
Full Interior with stock cx STREET TIRES ALL MOTOR:
RT.........439
60'........2.232
330.......5.937
1/8.......8.938
MPH......82.11
1000.....11.538
1/4.......13.737
MPH......102.51
Removed passenger seat and 70 shot of nitrous....
RT..........094
60'.........1.813
330.......5.080
1/8........7.790
MPH......88.43
1000.....10.142
1/4.......12.133
MPH......114.98
bottle pressure was 600-650psi (no heater)
i always heard this track was faster but didnt think it was that much faster **** i gained 3-4mph and dropped .3 thenths off with the same setup but colder plugs and seat removed
i swear it could have been 11.8-11.9 sec runs. if the damn line didnt leak nitrous.... oh well
Modified by 93H22ACX at 9:45 AM 12/29/2004
New times ALL MOTOR:
Full Interior with stock cx STREET TIRES ALL MOTOR:
RT.........439
60'........2.232
330.......5.937
1/8.......8.938
MPH......82.11
1000.....11.538
1/4.......13.737
MPH......102.51
Removed passenger seat and 70 shot of nitrous....
RT..........094
60'.........1.813
330.......5.080
1/8........7.790
MPH......88.43
1000.....10.142
1/4.......12.133
MPH......114.98
bottle pressure was 600-650psi (no heater)
i always heard this track was faster but didnt think it was that much faster **** i gained 3-4mph and dropped .3 thenths off with the same setup but colder plugs and seat removed
i swear it could have been 11.8-11.9 sec runs. if the damn line didnt leak nitrous.... oh well
Modified by 93H22ACX at 9:45 AM 12/29/2004
#4
Thread Starter
Join Date: Apr 2002
Location: Dynotuner.net, 2JZGTE
Posts: 2,884
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG's 1/4 ET (Full-Race SOHC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Full-Race SOHC »</TD></TR><TR><TD CLASS="quote">11.90 @116. Stock internal H22 with Zex dry kit, clutch, flywheel. Car weighed 1770 without driver.</TD></TR></TABLE>
tell me your secret in making the car that light
tell me your secret in making the car that light
#5
Honda-Tech Member
Re: H22 EG's 1/4 ET (93H22ACX)
My friend pulled:
13.9@102 with a mid 2.2 60'
stock motor besides: I/H/E not tuned
stock P13 (unchipped)
no wieght reductions
weighed in at 2160 without driver (He weighs about 180)
13.9@102 with a mid 2.2 60'
stock motor besides: I/H/E not tuned
stock P13 (unchipped)
no wieght reductions
weighed in at 2160 without driver (He weighs about 180)
#6
Thread Starter
Join Date: Apr 2002
Location: Dynotuner.net, 2JZGTE
Posts: 2,884
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG's 1/4 ET (turbogixxer)
damn with slicks he should be in some high 12's then....because my buddy with a B20VTEC and 75 shot of nitrous (Zex dry kit) with slicks ran a 13.3-13.4@101mph with MT slicks on lenzo rims.... and this is in a 1998 DX Hatch!
#7
Honda-Tech Member
Join Date: Jan 2002
Location: 13.9 at 101.76mph, 2420lbs, FL, USA
Posts: 5,690
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG's 1/4 ET (93H22ACX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer »</TD></TR><TR><TD CLASS="quote">My friend pulled:
13.9@102 with a mid 2.2 60'
stock motor besides: I/H/E not tuned
stock P13 (unchipped)
no wieght reductions
weighed in at 2160 without driver (He weighs about 180)</TD></TR></TABLE>
Are you sure kenny? After what i saw you two doing last weekend most people would assume he's your <U>boy</U>friend now.
EDIT:
<U>99 Coupe, 2850lbs. w/ driver</U>
Best Run as of May 28th:
60'.......... 2.245
330......... 6.235
1/8..........9.490
1/8 MPH. 76.760
1000....... 12.291
1/4......... 14.661
1/4 MPH. 93.710
That night's Setup:
-Still no intake
-AN-R header w/ full 2.5" KTeller exhaust
-P28 w/ JDMShit.com H22a program -change
-50psi fuel pressure @ WOT
-205-50-15 Azenis @ 25psi (front) 51psi (rear) on GSR Fat Fives
Edit:
New Quarter Mile time
As of July 8, 2004
Best ET run:
60'.......... 2.273
330......... 6.233
1/8..........9.468
1/8 MPH. 77.1
1000....... 12.239
1/4......... 14.583
1/4 MPH. 94.32
Best MPH: 95.19
Same setup as before, with the addition of an intake (j's racing, however, i am going to say that the intake isn't why i pulled better times/mphs) after quick session with a wideband I moved the Fuel pressure to 46psi. That gave me 12.6.-13.0 a/f ratio throughout second gear.
Only change was I was shifting at where my tach says 7700 instead of 7500. Obviously it made a difference.
Modified by DarkKnight[DMD] at 9:13 AM 6/22/2004
Modified by DarkKnight[DMD] at 12:20 AM 7/8/2004
13.9@102 with a mid 2.2 60'
stock motor besides: I/H/E not tuned
stock P13 (unchipped)
no wieght reductions
weighed in at 2160 without driver (He weighs about 180)</TD></TR></TABLE>
Are you sure kenny? After what i saw you two doing last weekend most people would assume he's your <U>boy</U>friend now.
EDIT:
<U>99 Coupe, 2850lbs. w/ driver</U>
Best Run as of May 28th:
60'.......... 2.245
330......... 6.235
1/8..........9.490
1/8 MPH. 76.760
1000....... 12.291
1/4......... 14.661
1/4 MPH. 93.710
That night's Setup:
-Still no intake
-AN-R header w/ full 2.5" KTeller exhaust
-P28 w/ JDMShit.com H22a program -change
-50psi fuel pressure @ WOT
-205-50-15 Azenis @ 25psi (front) 51psi (rear) on GSR Fat Fives
Edit:
New Quarter Mile time
As of July 8, 2004
Best ET run:
60'.......... 2.273
330......... 6.233
1/8..........9.468
1/8 MPH. 77.1
1000....... 12.239
1/4......... 14.583
1/4 MPH. 94.32
Best MPH: 95.19
Same setup as before, with the addition of an intake (j's racing, however, i am going to say that the intake isn't why i pulled better times/mphs) after quick session with a wideband I moved the Fuel pressure to 46psi. That gave me 12.6.-13.0 a/f ratio throughout second gear.
Only change was I was shifting at where my tach says 7700 instead of 7500. Obviously it made a difference.
Modified by DarkKnight[DMD] at 9:13 AM 6/22/2004
Modified by DarkKnight[DMD] at 12:20 AM 7/8/2004
Trending Topics
#8
Honda-Tech Member
Join Date: Jul 2002
Location: SoCal, CA
Posts: 3,435
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG's 1/4 ET (AMS MIKE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AMS MIKE »</TD></TR><TR><TD CLASS="quote">Friend did 13.6 on street tires.
Stock H22 in a eg coupe!
EXTRIX....A good driver indeed </TD></TR></TABLE>
damn, that's a great time.
Stock H22 in a eg coupe!
EXTRIX....A good driver indeed </TD></TR></TABLE>
damn, that's a great time.
#9
Honda-Tech Member
Re: H22 EG's 1/4 ET (DarkKnight[DMD])
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DarkKnight[DMD »</TD></TR><TR><TD CLASS="quote">]
Are you sure kenny? After what i saw you two doing last weekend most people would assume he's your <U>boy</U>friend now.
</TD></TR></TABLE>
I have a H22a acorrd you can run and a girl in a mustang, you want any, bitch?
oh, he calls you more than me. I guess your new "girl" friend is him
Are you sure kenny? After what i saw you two doing last weekend most people would assume he's your <U>boy</U>friend now.
</TD></TR></TABLE>
I have a H22a acorrd you can run and a girl in a mustang, you want any, bitch?
oh, he calls you more than me. I guess your new "girl" friend is him
#12
Honda-Tech Member
Join Date: Jan 2002
Location: 13.9 at 101.76mph, 2420lbs, FL, USA
Posts: 5,690
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG's 1/4 ET (turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer »</TD></TR><TR><TD CLASS="quote">
I have a H22a acorrd you can run and a girl in a mustang, you want any, bitch?
oh, he calls you more than me. I guess your new "girl" friend is him </TD></TR></TABLE>
I'll take your 14.7 once in a lifetime accord boy anytime. As for the girl, I'll run her in a couple of weeks, I'm sure by then her mustang will be in for a complete engine swap at Ford because of those perfect rod bearings (or whatever you said it was). You know what I'm talking about.
It's because he likes my "fast" car and wants to know how I got it that way. I don't like boys, you have no reason to be jealous.
I have a H22a acorrd you can run and a girl in a mustang, you want any, bitch?
oh, he calls you more than me. I guess your new "girl" friend is him </TD></TR></TABLE>
I'll take your 14.7 once in a lifetime accord boy anytime. As for the girl, I'll run her in a couple of weeks, I'm sure by then her mustang will be in for a complete engine swap at Ford because of those perfect rod bearings (or whatever you said it was). You know what I'm talking about.
It's because he likes my "fast" car and wants to know how I got it that way. I don't like boys, you have no reason to be jealous.
#13
Re: H22 EG's 1/4 ET (DarkKnight[DMD])
tell me your secret in making the car that light .
It was not a street car. Gutted, lexan all but the windshield, one piece front-end.
6 point mild steel cage. Fun little car. Simple but effective.
It was not a street car. Gutted, lexan all but the windshield, one piece front-end.
6 point mild steel cage. Fun little car. Simple but effective.
#14
Re: H22 EG's 1/4 ET (93H22ACX)
My best time when I was all motor was a 14.3 at 99 mph with a short ram intake in my h22 eg hb. My 60' was like 2.4 . My buddy ran my car and pulled a 14.1 at 99 mph. My car weighs about 2,175 with full interior.
#16
Re: H22 EG's 1/4 ET
Ran at Sac Raceway a few years ago (near sea level).... about 80 degrees outside. Running a 1850~ish lb hatchback (w/out me), stock JDM H22A motor, Hotshot 4-1 open header, DC intake, Spoon P13 ECU, 22x7x13 slicks, 700/600 springs.....
12.6 @ 109 mph
Add 100 shot of NOS......
11.5 @ 118 mph
To get those times, I had take make about 3 or so runs before I could get a best time down (different setups yield different launching strategies). Both of those times were 1.8-1.9 60' times.
Used to have it on video my my old HDD took a dump over a year ago
12.6 @ 109 mph
Add 100 shot of NOS......
11.5 @ 118 mph
To get those times, I had take make about 3 or so runs before I could get a best time down (different setups yield different launching strategies). Both of those times were 1.8-1.9 60' times.
Used to have it on video my my old HDD took a dump over a year ago
#17
Honda-Tech Member
Join Date: Apr 2003
Location: Bitburg Germany
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG's 1/4 ET (Newman)
Wow, There is some nice times here . I realize that every setup/ track is different , but maybe people can give some tips for better runs. I'm currently running a 13.6 @ 98 with 1.8 60's with a cai,imagine engineering header,exhaust , fpr/ rail, stage 2 clutch. I launch @ 6k on 22x8x13 m&H's.
#18
Senior Member
Re: H22 EG's 1/4 ET (turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer »</TD></TR><TR><TD CLASS="quote">
I have a H22a acorrd you can run and a girl in a mustang, you want any, bitch?
oh, he calls you more than me. I guess your new "girl" friend is him </TD></TR></TABLE>
He likes the mullet.
I have a H22a acorrd you can run and a girl in a mustang, you want any, bitch?
oh, he calls you more than me. I guess your new "girl" friend is him </TD></TR></TABLE>
He likes the mullet.
#23
Honda-Tech Member
Join Date: Feb 2004
Location: I LOVE BOOST,CT
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
jdm h22a -93dx
intake
itr exhaust
r/t .094
60 2.225
330 5.968
1/8 9.065
mph 79.58
1000 11.746
1/4 14.031
mph 98.77
car weighs 2190 w/o me ..i weigh 220
intake
itr exhaust
r/t .094
60 2.225
330 5.968
1/8 9.065
mph 79.58
1000 11.746
1/4 14.031
mph 98.77
car weighs 2190 w/o me ..i weigh 220
#25
Join Date: Apr 2003
Location: Omaha, Nebraska, U.S.A
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG's 1/4 ET (93H22ACX)
14.0 @ 99
(93 dx coupe w/full buddy club body kit)
Jdm h22a
fidanza flywheel
act hd-ss clutch
street tires (205/40/17 kumho ecsta supra)
aem fpr/rail
walbro hp 255lph
chipped p28 (dyno tuned 180whp and 150.1 torque)
(93 dx coupe w/full buddy club body kit)
Jdm h22a
fidanza flywheel
act hd-ss clutch
street tires (205/40/17 kumho ecsta supra)
aem fpr/rail
walbro hp 255lph
chipped p28 (dyno tuned 180whp and 150.1 torque)