H22 EG Ride height???
06-16-2007, 01:52 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: Emerald Coast
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
H22 EG Ride height???
I am worried about how low I can go with my hatch, and I say this because of axles. I am worried about breaking or damageing them if I go to low. If anyone has any imput on this issue please feel free to elaborate. Thanks 
06-17-2007, 08:31 AM
#3
Honda-Tech Member
Join Date: Nov 2006
Location: BFE, IN, USA
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG Ride height??? (oneslowstd)
My car is pretty well dumped for a H22 swap.
I have some axle binding issues when I turn right at higher speeds. A sacrifice I'm willing to make I suppose.
I have some axle binding issues when I turn right at higher speeds. A sacrifice I'm willing to make I suppose.
06-17-2007, 08:35 AM
#4
Join Date: Jun 2003
Location: NJ, US
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG Ride height??? (laynlohondachic)
I was dropped 1.75" from stock. This got me everywhere but still scrapes or dents my header in hairy situations. Lower than 2" your going to have to keep your eyes wide open
06-17-2007, 04:58 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: Emerald Coast
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 EG Ride height??? (h22sedan)
Yea im not worried about dings and dents im just worried about axles. I have gator stage two's but I don't know how much they can handle? Your eg is slammed though. Thanks for the imput
06-18-2007, 07:27 AM
#6
Member
Re: H22 EG Ride height??? (laynlohondachic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by laynlohondachic »</TD></TR><TR><TD CLASS="quote">Dont go too low...I cracked my oil pan on a manhole in my neighborhood...not worth all the trouble to be slammed on the ground!!</TD></TR></TABLE>
ditto.
endup up siezing my motor!!!
ditto.
endup up siezing my motor!!!
Thread
Thread Starter
Forum
Replies
Last Post
