H22 axles in EG. axles don't 'look' right...no 56k
#1
Honda-Tech Member
Thread Starter
Join Date: May 2002
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
H22 axles in EG. axles don't 'look' right...no 56k
i recently swapped my 4dr 92 dx with a jdm h22 with lsd.
i've only driven the car about a mile so far..maybe less.. but i was lookin in the engine bay right after the swap. when they custom made the axles i specified a 1 to 1.5 in drop. the drop on the car is 2.25" i haven't changed springs yet.
here's a few pics. first 4 are the drivers side. and the 5th is the right side. any input appreciated. TIA
drivers side:
PASSENGER SIDE:
i've only driven the car about a mile so far..maybe less.. but i was lookin in the engine bay right after the swap. when they custom made the axles i specified a 1 to 1.5 in drop. the drop on the car is 2.25" i haven't changed springs yet.
here's a few pics. first 4 are the drivers side. and the 5th is the right side. any input appreciated. TIA
drivers side:
PASSENGER SIDE:
#2
Honda-Tech Member
Thread Starter
Join Date: May 2002
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 axles in EG. axles don't 'look' right...no 56k (Y2K Si FBP)
also alil more info:
cut the wheel all the way no binding/popping noises..which is good. the left side just scares me.
i'm using hcp mount kit and stock prelude intermediate shaft. male/female
i drag/street alot. did numerous 1.8 1.9 60 foots in my old car last year b18c with stock axles stock lsd and drag radials
just worried with the way they look if they're gonna break' on the first launch or not.
cut the wheel all the way no binding/popping noises..which is good. the left side just scares me.
i'm using hcp mount kit and stock prelude intermediate shaft. male/female
i drag/street alot. did numerous 1.8 1.9 60 foots in my old car last year b18c with stock axles stock lsd and drag radials
just worried with the way they look if they're gonna break' on the first launch or not.
#4
Honda-Tech Member
Join Date: Jan 2002
Location: 3IRE
Posts: 2,422
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 axles in EG. axles don't 'look' right...no 56k (Y2K Si FBP)
looks how mine looks.... my boot ripped on the way to get my exhaust done. havent broken yet, and its been almost 8,000 km's
#7
Senior Member
Re: H22 axles in EG. axles don't 'look' right...no 56k (Y2K Si FBP)
You haven't had any issues? Mine is dropped 2.75" and has been for a few years now. No issues.
Thread
Thread Starter
Forum
Replies
Last Post