Mr.2.2 hatch

question i am taking my h22 out of my accord cause my car is totaled even thou it ran a 12.9. Anyways i brought a 92 hatch and i got my hasport mount. what axles should i use!!!!????!!! i was going to buy the hasport stage2 axles but i am scared to buy them and have them brake easy. everyone keeps telling me that h22 in a 92 hatch brakes axles easy. help me get this clear please

Turbogixxer

90-93 integra axles with Prelude inner CVs work great. I have never broke an axle yet!

I will probably do a write up soon, like within a month or so.

What intermediate shaft you using? Prelude?

Mr.2.2 hatch

i am using a prelude intermediate shaft. i have an accord but everyone keeps saying to use the prelude one, even hasport said to use the prelude ones? and what car and year do you have the h22 in? you not pressin it hard in 1st gear. i didnt think stock 90-93 interga axles will hold they never hold for my friend now he has dss axles and still brakes them.

Turbogixxer

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.2.2 AccordLude &raquo;</TD></TR><TR><TD CLASS="quote">i am using a prelude intermediate shaft. i have an accord but everyone keeps saying to use the prelude one, even hasport said to use the prelude ones?</TD></TR></TABLE>

The difference in accord and prelude shafts are that the prelude is a male end and the accord is a female. If you use the use the accord intermediate shaft and 90-93 or 86-89 integra axles. They will plug right in. The only problem is that the integra bearings (if what I have seen) are smaller (inner CV) and they have sallower inner CV cup then preludes.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.2.2 AccordLude &raquo;</TD></TR><TR><TD CLASS="quote">and what car and year do you have the h22 in?</TD></TR></TABLE>

EG, dropped 3". No bind. No broken axles.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.2.2 AccordLude &raquo;</TD></TR><TR><TD CLASS="quote">you not pressin it hard in 1st gear.</TD></TR></TABLE>

Nope, launched at the track with drag radials. The car is not babied.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.2.2 AccordLude &raquo;</TD></TR><TR><TD CLASS="quote">i didnt think stock 90-93 interga axles will hold they never hold for my friend now he has dss axles and still brakes them.</TD></TR></TABLE>

Either your friend is doing something wrong or the axles are a bad set(s). I swapped a EK with stage one DSS. He has no problems. Launching at the track and all.

Stock axles are stronger them most people think.

Mr.2.2 hatch

thanks

Mr.2.2 hatch

thanks

EGh22please

hi uhm.. i recently just popped my axles in my EG with an h22 swap, would stock prelude axles fit? if not.. what kind would i need?

C M S

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EGh22please &raquo;</TD></TR><TR><TD CLASS="quote">hi uhm.. i recently just popped my axles in my EG with an h22 swap, would stock prelude axles fit? if not.. what kind would i need?</TD></TR></TABLE>Do u have Teg axles?

I use the tegs w/ Accord inter. I have LSD and have launched at 7k on slicks about 5 times now with no probs. Save yourself some money and buy Autozone teg axles. If u break em, lifetime warranty. If u break Hasport or Dss or any other aftermarket axle your assed out...

enigma94

so far my hasport stage 1's are awsome. i have a 92 EG dropped 3 1/2'' and no binding or anything.

skunked

I run a H22 intermediete shaft with 89 integra axles and prelude inners. 1.7 60 ft's

This setup is good for either a eg or DC chassis. If your worried about them breaking get out the pocket book and buy some gators, driveshaft shop, raxles, etc.