Gsr b20 swap wont rev past 4500
#1
Gsr b20 swap wont rev past 4500
Hey guys . I've been doing some reading and I can't seem to figure out why my gsr won't pass 4500 on any gear . It's like it's limited . I've read that it could have been a dizzy but my dizzy is brand new .
I have a p72 ecu I read that it could have been a possibility so I tried my buddies p72 off of his b20 swap. My car still wouldn't rev passed 4500.
I do have a check engine light on and I did my own diag . It's obd1 and the only code it's giving me is 21 which is the vtec solenoid. I replaced the solenoid and oil pressure switch already. I still have the same problem.
If I haven't tried something please let me know. I'm out of ideas . Thanks for your time you guys .
Now it's a 94 integra b20 swap.
I have a p72 ecu I read that it could have been a possibility so I tried my buddies p72 off of his b20 swap. My car still wouldn't rev passed 4500.
I do have a check engine light on and I did my own diag . It's obd1 and the only code it's giving me is 21 which is the vtec solenoid. I replaced the solenoid and oil pressure switch already. I still have the same problem.
If I haven't tried something please let me know. I'm out of ideas . Thanks for your time you guys .
Now it's a 94 integra b20 swap.
Thread
Thread Starter
Forum
Replies
Last Post