Good places in Frisco/Sac to get custom engine mounts?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: Somewhere in California
Posts: 4,408
Likes: 0
Received 3 Likes
on
3 Posts
Good places in Frisco/Sac to get custom engine mounts?
Hi everybody,
I posted this in the Members corner, But I posted it in here as well in case some of you guys may not visit Members Corner .
I was thinking about doing a project car for cheap. Are there any places in the San Fransisco or Sacramento area that do stuff like custom engine installs, axle fabrication, tranny fabrication that sort of stuff.
I was looking into the costs of swapping a 13B or a 3SGTE into a lightweight car like the AE86. I am obviously gonna need a lot of stuff custom made, so I wanted to go to a place with some experience.
BTW this has nothing to do with the AE86 with 600ps 20B vid that I posted a few days ago =D hehehe
for anyone that missed it, here is the vid:
AE86 with a 600ps 20B rotary engine (20B = 2.0L)
vid is in .asx format, 1.03 MB
http://www.nightracer.com/3rotorae86.asx
TIA
I posted this in the Members corner, But I posted it in here as well in case some of you guys may not visit Members Corner .
I was thinking about doing a project car for cheap. Are there any places in the San Fransisco or Sacramento area that do stuff like custom engine installs, axle fabrication, tranny fabrication that sort of stuff.
I was looking into the costs of swapping a 13B or a 3SGTE into a lightweight car like the AE86. I am obviously gonna need a lot of stuff custom made, so I wanted to go to a place with some experience.
BTW this has nothing to do with the AE86 with 600ps 20B vid that I posted a few days ago =D hehehe
for anyone that missed it, here is the vid:
AE86 with a 600ps 20B rotary engine (20B = 2.0L)
vid is in .asx format, 1.03 MB
http://www.nightracer.com/3rotorae86.asx
TIA
#2
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: Somewhere in California
Posts: 4,408
Likes: 0
Received 3 Likes
on
3 Posts
Re: Good places in Frisco/Sac to get custom engine mounts? (BlueShadow)
Anyone? I'm not looking for specifics about the swap, I just wanted to know if there are any reputable welder/fabricators in the bay area.
..or is there no one in the hybrid forum from that area?
..or is there no one in the hybrid forum from that area?
Thread
Thread Starter
Forum
Replies
Last Post