Full QSD H2B Ek write-up (56k No way in hell, over 65 pics.) Enjoy.
#151
Junior Member
Join Date: May 2003
Location: portland, or, USA
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Re: (turtleman321)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turtleman321 »</TD></TR><TR><TD CLASS="quote">so i didnt have an oxy-acetelyne torch so i did the next best thing
first we got the coals going and decided it was time for a BBQ so i busted out the hot dogs.
then once the header started to glow red and reach 1304 degrees.
we got to bending. ( no tree was hurt in this project.)
</TD></TR></TABLE>
man that is GANGSTA!!! LOL.
first we got the coals going and decided it was time for a BBQ so i busted out the hot dogs.
then once the header started to glow red and reach 1304 degrees.
we got to bending. ( no tree was hurt in this project.)
</TD></TR></TABLE>
man that is GANGSTA!!! LOL.
#152
Honda-Tech Member
Join Date: Aug 2002
Location: Westslope, CO, United States
Posts: 3,048
Likes: 0
Received 0 Likes
on
0 Posts
Re: (turtleman321)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turtleman321 »</TD></TR><TR><TD CLASS="quote">so i didnt have an oxy-acetelyne torch so i did the next best thing
first we got the coals going and decided it was time for a BBQ so i busted out the hot dogs.
then once the header started to glow red and reach 1304 degrees.
we got to bending. ( no tree was hurt in this project.)
</TD></TR></TABLE>
So did that work?
first we got the coals going and decided it was time for a BBQ so i busted out the hot dogs.
then once the header started to glow red and reach 1304 degrees.
we got to bending. ( no tree was hurt in this project.)
</TD></TR></TABLE>
So did that work?
#155
Go Tigers!
Re: (turtleman321)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turtleman321 »</TD></TR><TR><TD CLASS="quote">so i didnt have an oxy-acetelyne torch so i did the next best thing
first we got the coals going and decided it was time for a BBQ so i busted out the hot dogs.
img]http://i9.photobucket.com/albums/a96/turtleman321/H2Bbuild7656583.jpg[/img]
then once the header started to glow red and reach 1304 degrees.
img]http://i9.photobucket.com/albums/a96/turtleman321/H2Bbuild7656586.jpg[/img]
img]http://i9.photobucket.com/albums/a96/turtleman321/H2Bbuild7656590.jpg[/img]
we got to bending. ( no tree was hurt in this project.)
img]http://i9.photobucket.com/albums/a96/turtleman321/H2Bbuild7656588.jpg[/img]</TD></TR></TABLE>
This is quite possibly the most amazing thing that I've seen in this forum. PURE genious!
first we got the coals going and decided it was time for a BBQ so i busted out the hot dogs.
img]http://i9.photobucket.com/albums/a96/turtleman321/H2Bbuild7656583.jpg[/img]
then once the header started to glow red and reach 1304 degrees.
img]http://i9.photobucket.com/albums/a96/turtleman321/H2Bbuild7656586.jpg[/img]
img]http://i9.photobucket.com/albums/a96/turtleman321/H2Bbuild7656590.jpg[/img]
we got to bending. ( no tree was hurt in this project.)
img]http://i9.photobucket.com/albums/a96/turtleman321/H2Bbuild7656588.jpg[/img]</TD></TR></TABLE>
This is quite possibly the most amazing thing that I've seen in this forum. PURE genious!
#156
Honda-Tech Member
Join Date: Nov 2005
Location: Harrisburg, PA
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
lol it was somethings else. i was like where the expletive am i going to get a torch. and then i was like well charcoal gets up to really high temps and i could easily heat it evenly.
#158
Honda-Tech Member
Re: (Bense)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bense »</TD></TR><TR><TD CLASS="quote">
This is quite possibly the most amazing thing that I've seen in this forum. PURE genious!</TD></TR></TABLE>
Yeah, no **** that was funny! lolol
This is quite possibly the most amazing thing that I've seen in this forum. PURE genious!</TD></TR></TABLE>
Yeah, no **** that was funny! lolol
#160
Honda-Tech Member
Join Date: May 2007
Location: Dallas, Tx, United States
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full QSD H2B Ek write-up (56k No way in hell, over 65 pics.) Enjoy. (95turboeg)
Ok hows wiring the Vtec? is it the same as wiring for a gsr or si?
its going to be swaped in a car that has no vtec. 97 DX hatch. Give me info on that please.
its going to be swaped in a car that has no vtec. 97 DX hatch. Give me info on that please.
#161
Go Tigers!
it's going to be the same as a jdm gsr, might need to plug in a pressure switch into the f20b solenoid where that plug is
you can see it here, left of dizzy, silver zinc plated bolt
you can see it here, left of dizzy, silver zinc plated bolt
#162
Honda-Tech Member
Join Date: May 2007
Location: Dallas, Tx, United States
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Bense)
So the F20B same as an H22A Wiring? or more of a jdm gsr like you said.
Will the cuting and splicing be the same as a gsr swap?
I might just let hasport turn it into a h22 if its the same.
Also will a stock 97 ex harness just plug in without any hassel?
Will the cuting and splicing be the same as a gsr swap?
I might just let hasport turn it into a h22 if its the same.
Also will a stock 97 ex harness just plug in without any hassel?
#163
Re: Full QSD H2B Ek write-up (56k No way in hell, over 65 pics.) Enjoy. (95turboeg)
Hey i was just wondering what kind of mounts those are they kind of look like innovative mounts but not really sure. Thanks.
#170
Junior Member
Join Date: Sep 2005
Location: porto, porto, portugal
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re:
braxton you and your brother are thieves probably you stole that engine, this guy is a scammer took my money and slooshy for a turbo kit and never sent it , he contacted me and sloshy saying that was his young brother that had stole his credit card and started to put items for sale in ebay, he agreed to refund us but never had done that and stop reply to us. they are a wheel known scammers
#172
Re: Full QSD H2B Ek write-up (56k No way in hell, over 65 pics.) Enjoy. (95turboeg)
hey i got a question.....all i need is to take out the pin that hold the cluch to the transmittion....it a 1/4 pin...how do u take it out...
#173
Honda-Tech Member
Re: Full QSD H2B Ek write-up (cxek)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cxek »</TD></TR><TR><TD CLASS="quote">hey i got a question.....all i need is to take out the pin that hold the cluch to the transmittion....it a 1/4 pin...how do u take it out... </TD></TR></TABLE>
A/C compressor bolt and a B.F.H. this is assuming you're talking about the spring pin that connects the shift linkage to the transmission.
A/C compressor bolt and a B.F.H. this is assuming you're talking about the spring pin that connects the shift linkage to the transmission.
#175
Honda-Tech Member
Re: Full QSD H2B Ek write-up (projectTeG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projectTeG »</TD></TR><TR><TD CLASS="quote"> [img]http://www.tamparacing.com/photopost/data/500/medium/f20b_install_050.jpg[img]
okay how does that work is there not a bolt for the top ot the t-bracket?</TD></TR></TABLE>
The kit comes with the bolt for that, and and a spacer that goes on the side with the gap so it doesnt pinch the bracket.
okay how does that work is there not a bolt for the top ot the t-bracket?</TD></TR></TABLE>
The kit comes with the bolt for that, and and a spacer that goes on the side with the gap so it doesnt pinch the bracket.