FPR vacume line goes . .
03-08-2004, 11:46 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: work.
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
FPR vacume line goes . .
I have a b16 in a crx si and Im using the stock map, dashpot cutoff and purge cutoff solenoids, my question is can I hook the FPR top vacume line to the top of the purge cutoff solenoid or just to the back of the intake mani?
03-11-2004, 06:53 PM
#3
Honda-Tech Member
Re: FPR vacume line goes . . (doublejz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doublejz »</TD></TR><TR><TD CLASS="quote">back of the intake manifold</TD></TR></TABLE>
Yes.
Yes.
03-11-2004, 10:17 PM
#5
Join Date: Nov 2002
Location: Utah, foo, usa
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
Re: FPR vacume line goes . . (2trix)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2trix »</TD></TR><TR><TD CLASS="quote">hmmm thats weird on my h22 the vacuum was hooked to the purge? is this not correct!?</TD></TR></TABLE>
I had mine like that too. It actually came like that on my jdm swap. Then I just bypass it to the inake manifold.
I had mine like that too. It actually came like that on my jdm swap. Then I just bypass it to the inake manifold.
Thread
Thread Starter
Forum
Replies
Last Post
Attoir
Forced Induction
8
05-21-2006 06:36 PM
silentdaredevil2
Honda Civic / Del Sol (1992 - 2000)
8
01-03-2006 03:14 PM
1.8
Forced Induction
9
12-26-2004 09:38 PM