filter to rail fuel line (making new one)?
05-27-2007, 08:36 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: where cars dont get stolen, NY
Posts: 4,370
Likes: 0
Received 8 Likes
on
6 Posts
filter to rail fuel line (making new one)?
so im about to put my b swap into my ek, and know that you kinda have to ghetto rig the filter so that the line will reach the rail.
so i wanna do a setup like this.
if you can see what i mean in this pic?
my fp gauge is already replacing the banjo bolt on the filter.
so basically my question is can i use the earls 10mm banjos? i believe thats the correct size? use a 90 degree for off the rail and just a straight off the filter with a piece of stainless braided hose?
any input?
so i wanna do a setup like this.
if you can see what i mean in this pic?
my fp gauge is already replacing the banjo bolt on the filter.
so basically my question is can i use the earls 10mm banjos? i believe thats the correct size? use a 90 degree for off the rail and just a straight off the filter with a piece of stainless braided hose?
any input?
Thread
Thread Starter
Forum
Replies
Last Post
turbo Si
Honda Civic / Del Sol (1992 - 2000)
3
12-27-2002 01:27 PM
rOby
Forced Induction
22
09-10-2002 07:48 PM
