a few questions on b18c block on b16a head
05-19-2007, 12:45 AM
#1
Honda-Tech Member
Thread Starter
a few questions on b18c block on b16a head
Ok, I have a 94 del sol vtec with a B16a3 stock in the car. I am planning on doing a mild turbo setup and wanted the extra displacement while I am at it. So I was to throw a "semi-built" GSR bottom end in, with just pistons and rods, my question is, what am I going to have to change?
I dunno, like stupid questions have popped in my head, is the oil setup the same, is the coolant lines the same, do the intermediate shafts 3 mounting bolts the same for a b16 and a gsr, or am I going to have to get a gsr intermediate shaft.
I dunno, I searched gsr, but didn't find anything to help me. I am probly putting to much thought into it, but any advice/help would be much appreciated.
I dunno, like stupid questions have popped in my head, is the oil setup the same, is the coolant lines the same, do the intermediate shafts 3 mounting bolts the same for a b16 and a gsr, or am I going to have to get a gsr intermediate shaft.
I dunno, I searched gsr, but didn't find anything to help me. I am probly putting to much thought into it, but any advice/help would be much appreciated.
Thread
Thread Starter
Forum
Replies
Last Post