EVAP with a jdm itr swap
07-24-2009, 06:15 AM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: pickering, on, canada
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
EVAP with a jdm itr swap
Hey I have a 2000 civic EM1 which originally had a b16 in it. It now has a jdm ITR (96 spec) which obviously does not have any EVAP purge solenoids or anything like that. It is also running the matching OBD2-A P73 ECU.
My question is what do I do with the evap canister and stuff like that? There is no hose connected to the purge nipple on my canister. Is my tank getting properly vented? I keep hearing a wierd noise out of it every 3 minutes after turning the car off. I tried searching but couldnt come up with anything?
If anyone could give me some insight it would be greatly appreciated.
John
My question is what do I do with the evap canister and stuff like that? There is no hose connected to the purge nipple on my canister. Is my tank getting properly vented? I keep hearing a wierd noise out of it every 3 minutes after turning the car off. I tried searching but couldnt come up with anything?
If anyone could give me some insight it would be greatly appreciated.
John
Thread
Thread Starter
Forum
Replies
Last Post
