Ek Swap Wiring Info (Sad to have to ask this)
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2003
Location: Orange County, Pa, USA
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Ek Swap Wiring Info (Sad to have to ask this)
I have owned 3 eg's, and 3 dc's and just bought an ek and i am stumped on some of the wiring info. I have a 1997 Dx Hatchback, a 1998 Jdm b18b motor, 1996 Gsr Tranny, a 1995 p75 obd1 ecu with a phearable OBD2A to OBD1 conversion harness. I have all the hardware (axles, linkage, mounts, t-bracket everything)
Now i tried to connect my stock DX harness to the LS motor and alot the plugs dont meet up or connect and I just need some info on what needs to be extended and modified on the harness. I searched all 662 results but alot have dead pics and vague answers. If anyone has a link or some in depth info as far as engine wiring.
Now i tried to connect my stock DX harness to the LS motor and alot the plugs dont meet up or connect and I just need some info on what needs to be extended and modified on the harness. I searched all 662 results but alot have dead pics and vague answers. If anyone has a link or some in depth info as far as engine wiring.
#3
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2005
Location: ca
Posts: 2,711
Likes: 0
Received 0 Likes
on
0 Posts
get urself a wirein digram, find the sensors on the motor, find the plug on the harness, plug it in, if it doesnt match up either you have the wrong plug or u need to convert the plug to a diff. style so it plugs in
Thread
Thread Starter
Forum
Replies
Last Post