Ek H22 hatches- Guys, question on axle bindage
 

hey guys, I have a slight issue with my h22 hatch now that i've lowered it..
I have a set of Neuspeed Sport springs and KYB AGX shocks, and since I've lowered it if I hit a large bump, or go around a sweeping left hand turn with any speed, my axle (s) binds pretty bad. I'm using the HCP mount kit with front cross mount, and a '90 Accord intermediate Shaft, '89 teg passenger axle and 90 teg driver side axle. I changed the passenger side axle from 90-89 because it was really binding when I first did the swap. Maybe the driver side one needs to be replaced now for the shorter 89? Are there any other options besides those $300 wonders from Driveshaftshop.com? http://images.honda-tech.com/set1//smile/emcrook.gif

Re: Ek H22 hatches- Guys, question on axle bindage (EK22Tim)
 

Mine is dropped quite a bit in the front, and I had to use 86-88 teg. axles, but it seems that they still pop some in the morning.....Ususally its just as I roll off from sitting somewhere. After I get rolling it doesnt do it anymore.

Mark

Re: Ek H22 hatches- Guys, question on axle bindage (SlvrEj6Dx)
 

Damn that sux.. Driveshop will be your best friend..

Re: Ek H22 hatches- Guys, question on axle bindage (SlvrEj6Dx)
 

Mark, you used 86-88 Teg axles? I thought the spline shaft count was different? Obviously not.. https://honda-tech.com/forums/images...es/emsmile.gif haha anyways, thanks for the advice. How much shorter are they anyway?
Jason:
I just don't have the $300 bux it's gonna be to get new ones, that's all. https://honda-tech.com/forums/images/smilies/emsad.gif We could start an EK22TIM hatch get well fund??

Re: Ek H22 hatches- Guys, question on axle bindage (EK22Tim)
 

I hear ya bud. That is the way of the h22 though. Just have to grin and bear it for now till the funds are available. Are you coming to the meet on the 1st of June at least??

My dirty car will be there..

Re: Ek H22 hatches- Guys, question on axle bindage (Jason kiDD)
 

Naaw, too far for me to drive, unfortunately!!!! https://honda-tech.com/forums/images/smilies/emsad.gif I'd love to join ya, but I'm in upstate, like 6 hrs from the City! https://honda-tech.com/forums/images/smilies/emsad.gif
Yeah, I know.. The way of the H22 is not for the faint of heart, right? haha Glad to hear yours is running again!!

Re: Ek H22 hatches- Guys, question on axle bindage (EK22Tim)
 

Damn are you really that far away?!? And we are meeting in Jerzy I figure that is would be a little closer to you.. And yeah I am glad my car is running too, however just the other day as usual my f22 or Accord ECU finally took a dump on me so now I have nothing to do but wait for this chipped p28 to come in if I am going to make it. Hopefully it will be here before this weekend so I can at least be at the meet I am trying to organize.. hehe

May the force be with you and not own joo!!

Re: Ek H22 hatches- Guys, question on axle bindage (Jason kiDD)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">Mark, you used 86-88 Teg axles? I thought the spline shaft count was different? Obviously not.. haha anyways, thanks for the advice. How much shorter are they anyway?</TD></TR></TABLE>

I think the 86-88 are about 1" shorter (just right for my car). The thing is that when I did the axles I have in there now I put the prelude inner joint on the pass. side, and I think I didnt get enough grease in there.....thats my theory on why it pops. The driver side is also the 86-88 teg. but my bro was using it on his 89 civic with ls/vtec & lsd tranny, and I think he messed up the outer bearings cuz his lsd made the axles pop really bad around corners....

Mark

Re: Ek H22 hatches- Guys, question on axle bindage (SlvrEj6Dx)
 

Ok, so you had to change the joints? I just was hoping for a plug n play swap. https://honda-tech.com/forums/images/smilies/emsad.gif

Re: Ek H22 hatches- Guys, question on axle bindage (EK22Tim)
 

You really might want to bear down and spend the money on DSS axles. My car is lowered about 1.5in give or take a little. No matter what kind of pot hole or hard corners I have had no binding at all. I would say it would be money well spent. https://honda-tech.com/forums/images...s/emsmilep.gif

Re: Ek H22 hatches- Guys, question on axle bindage (junglerunna02)
 

try the 89 axle on the driver side and see how it goes.

Re: Ek H22 hatches- Guys, question on axle bindage (fastwanabe)
 

anyone use the driveshaft shop axles on there ek h22 hatches??i'm going to have like 2-2.5inch drop in the front...dont need/want problems https://honda-tech.com/forums/images...s/emsmilep.gif

Re: Ek H22 hatches- Guys, question on axle bindage (GOLDBERG)
 

how low can you go if you have dss axles?

Re: Ek H22 hatches- Guys, question on axle bindage (fastwanabe)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fastwanabe &raquo;</TD></TR><TR><TD CLASS="quote">try the 89 axle on the driver side and see how it goes.</TD></TR></TABLE>
Ok will do. Now I just have to find TIME to do it!! https://honda-tech.com/forums/images/smilies/emsad.gif

Re: Ek H22 hatches- Guys, question on axle bindage (EK22Tim)
 

bump

Re: Ek H22 hatches- Guys, question on axle bindage (GOLDBERG)
 

any updates?

Re: Ek H22 hatches- Guys, question on axle bindage (fastwanabe)
 

No, sorry nothing yet. I can't seem to find a time to work on my car when auto Zone is open to exchange the axle.

Re: Ek H22 hatches- Guys, question on axle bindage (EK22Tim)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EK22Tim &raquo;</TD></TR><TR><TD CLASS="quote">No, sorry nothing yet. I can't seem to find a time to work on my car when auto Zone is open to exchange the axle. </TD></TR></TABLE>

You have to make time my friend or there will never be time.

dude, fix ur freakin car.......then let me buy it from you............lol Im trying to find one already done..........

Re: (pitbull97)
 

haha I just never corner hard left that's all! THen it's not broken! https://honda-tech.com/forums/images/smilies/emthup.gif
anyway, I'm shooting for this weekend, or early next week to do this. Hey, it's for sale if the price is right!! https://honda-tech.com/forums/images...es/emsmile.gif